Ultra Thin 20-Pair Parallel SetFeatures:6" length, 1/32" width. Hardened HRc 50. Parallelism: ±0.0001" Height accuracy: ±0.0001" Range of sizes include:1/2" thru 1-11/16" by 1/16" intervals. Fitted plastic case
10pcs Precision Angle Block SetFeatures:Accuracy:±0.0001"per inch,±30 are seconds.Furnished in 1 incrementers to 5°, and in 5° increments to 30°. For angle set-ups in tooling, productions and inspection. Hardened and precision ground. Lightly magnetized for better holding. Size 3" long x 1/4" thick. Ten-block set complete with fitted case.ItemDescriptionEG02-01113" Long x 1/4" Thick
Adjustable Parallel SetFeatures:Height range: 3/8" to 1/2", 1/2" to 11/16", 11/16"to 15/16", 15/16" to 1-5/16", 1-5/16" to 1-3/4", 1-3/4" to 2-1/4" Length range from 1-3/4" to 5" Closed Quickly adjustable and locked withscrews for micro meter measurement. For layout, inspection, stop work, set-up, etc. ItemDescriptionEG02-5001Adjustable Parallel Sets
Solid Angle Plates SetFeatures:Hardened & ground steel. Precision ground angles forsetup in tooling,production and inspection.Four holes 11/32" for easy mounting.Accuracy: ±10 minutes.ItemDescriptionEG10-9010Dimension: (30º, 60º, 90º) and (45º, 45º, 90º)
Speed Handle For Machine ViseFeatures:3/4" Hex. hub Move the vise jaw much faster. ItemDescription1100-8116SPEED HANDLE FOR MACHINE VISE
Super Angle Lock Precision Swivel Base Milling Machine ViseFeatures:● With swivel base● Removable hinged handle for fast locking● Provides better clamping pressureItemDescriptionFA20-4204Length: 13.582", Width: 8.858", Height: 4.724"FA20-4206Length: 17.322", Width: 10.944", Height: 6.023"
BT40 Tool Holder Tightening Fixture For Universal CNC Equipment, Double Head Anodized HardenedFeatures:Applicable model is BT40Realize Double-end Mounting, facilitate mount and dismount.Modern design, protect the conical surface of the tool holder.Sliding block positioning design, correct orientation and non-skid.Adopt new material, detailed and comprehensive protection.Match for BT40 tool holer type: BT40 L: 255mm W: 140mm H: 140mmWhen installing the CNC tools on machine tools, some parts such as tools and pull studs need to installed on tool holders. Because of the specific form of the CNC tools, the traditional tool lock seat can’t satisfy the tighten or unscrew requirement during production, assembling and using. There are an upward direction lock snap ring and a downward direction lock snap ring on the dicephalous tool lock base. They can satisfy the installation of CNC pull studs, ER nuts, and Tools, etc. from both directions.ItemDescriptionBT40-8540L: 255mm W: 140mm H: 140mm
CAT40 Collet Chuck Tightening Fixture Fit CAT40 Tool Holder as Well as SK40 and JT40 HOLDERFeatures:Applicable model is CAT 40 or SK40 or JT 40Correct orientation and non-slip quench hardeningEasy to install, reliable, protect tool holder,could bear greater torque, avoid skiddingThe material is aluminum alloyNovel hollow design, protect the conical surface of the tool holder.Adopt new material, detailed and comprehensive protection.Match for CT40 tool holer type as well as SK40 and JT40When installing the CNC tools on machine tools, some parts such as tools and pull studs need to installed on tool holders.Because of the specific form of the CNC tools, the traditional tool lock seat can’t satisfy the tighten or unscrew requirement during production, assembling and using. There are an upward direction lock snap ring and a downward direction lock snap ring on the dicephalous tool lock base. They can satisfy the installation of CNC pull studs, ER nuts, and Tools, etc. from both directions.ItemDescriptionCT40-7840Applicable model is CAT 40 or SK40 or JT 40
CAT50 / SK50 / JT 50 Collet Chuck Tightening Fixture Fit CAT50 Tool HolderFeatures:Applicable model is CAT50 as well as SK50 and JT50 Tool HolderCorrect orientation and non-slip quench hardeningEasy to install, reliable, protect tool holder, could bear greater torque, avoid skiddingThe material is aluminum alloyNovel hollow design, protect the conical surface of the tool holder.Adopt new material, detailed and comprehensive protection.Match for CT50 tool holer type as well as SK50 and JT50When installing the CNC tools on machine tools, some parts such as tools and pull studs need to installed on tool holders. Because of the specific form of the CNC tools, the traditional tool lock seat can’t satisfy the tighten or unscrew requirement during production, assembling and using. There are an upward direction lock snap ring and a downward direction lock snap ring on the dicephalous tool lock base. They can satisfy the installation of CNC pull studs, ER nuts, and Tools, etc. from both directions.ItemDescriptionCT50-7850Applicable model is CAT50 as well as SK50 and JT50 Tool Holder
BT30 Tool Holder Tightening Fixture For Universal CNC Equipment, Double Head Anodized HardenedFeatures:Applicable model is BT30Realize Double-end Mounting, facilitate mount and dismount.The material is aluminum alloy, alloy steel composite.Easy to install, reliable, protect tool holder, could bear greater torque, avoid skiddingSliding block positioning design, correct orientation and non-skid.Adopt new material, detailed and comprehensive protection.Match for BT30 tool holer typeWhen installing the CNC tools on machine tools, some parts such as tools and pull studs need to installed on tool holders. Because of the specific form of the CNC tools, the traditional tool lock seat can’t satisfy the tighten or unscrew requirement during production, assembling and using. There are an upward direction lock snap ring and a downward direction lock snap ring on the dicephalous tool lock base. They can satisfy the installation of CNC pull studs, ER nuts, and Tools, etc. from both directions.ItemDescriptionBT30-8530Match For BT30ToolHoler Type
Mill StopFeatures:Serves as a rigid stop for milling set-ups. Used with vises, angle plate, jigs, etc Use as a versatile holder, as well as stop Column:3/4" x6-1/4" Base:3/4" x2" x4-1/2" Rod:3/8" x10" ItemDescriptionABQK-0100Range:3/8"-3/4"
Universal Angle Block SetFeatures:Tolerance ±1". Hardness HRC 45-50°. All ground finish. No sice vise,sine plate,angle vise,angle chart or block gage needed. Vee Block dimensions:3"long,1-3/16" wide ,1-3x16"highAngle plate dimensions:2-3/4"long,1-3/16"wide 5/64" high at the narrow end.Set Includes: V-Block 10°,15°,30°. Angle Plate 1°, 2°,3°,4°,5°.ItemDescriptionEG02-0224UNIVERSAL ANGLE BLOCK SET