Digital Quick Micrometer

Digital Quick Micrometer Absolute Origin Speed Mic Snap Indicating Lever Action Gage IP65 Coolant Proof, Built In Wireless TransmissionFeatures:Absolute originNo rotating spindle and avoid scratch partsQuickly measure with super high precision lever activated - fully opens and closes in less than one second. Fixed thimbleMeasuring range: 0-1"/0-25mmCarbide tipped spindleIP65 protection levelResolution: 0.00005"/0.001mm; Accuracy: ±0.00015"/0.003mmBuilt in wireless transmission (blue tooth)Ball attachment Included.3V lithium batteryFitted case includedItemDescriptionMD10-0001Range:   0-1"/0-25mm, Resolution: 0.00005"/ 0.001mm,Accuracy:   0.00015"/ 0.003mmMD10-0002Range: 1-2"/ 25-50mm, Resolution:   0.00005"/ 0.001mm, Accuracy: 0.00015"/ 0.003mmMD10-0003Range: 2-3"/ 50-75mm, Resolution:   0.00005"/ 0.001mm, Accuracy: 0.00015"/ 0.003mmMD10-0004Range: 3-4"/75-100mm, Resolution:   0.00005"/ 0.001mm, Accuracy: 0.00015"/ 0.003mm

Item0: MD10-0001
Item: MD10-0002
Item2: MD10-0003
Item4: MD10-0004
Item3: None
Electronic Digital Caliper,IP54

Electronic Digital Caliper Extra-Large LCD, Metal Cover, Stainless Steel,IP54 Water ResistantFeatures:Premium high-quality digital caliper 4 ways Use for inside, outside, depth and step measurements with inch/metric conversionMetal covers heavy duty.Immediately displays on a large LCD screen when pulling it, 5 minutes automatically offConstructed with HRC 52.5 hardened stainless steel shafts which with IP54 water resistantRequires one 3V CR2032 battery (battery & replacement included)ItemDescription2015-01500-6"x 0.0005"/150mm x 0.01mm2015-02000-8"x 0.0005"/200mm x 0.01mm2015-03000-12"x 0.0005"/300mm x 0.01mm

Item0: 2015-0200
Item: 2015-0150
Item2: 2015-0300
Item4: None
Item3: None
Dial Caliper Stainless Steel

       Dial Caliper Stainless SteelDirect reading to 0.001" on large clear dial  Measuring face hardened, precision ground and  micro-lapped for absolute accuracy  Adjusting slide for fine adjustment  Inside, outside,and depth measurements  Satin chrome finish,crisp engraved graduations  Clamp for repetitive setting  Accurate to ±0.001" per 6"  Covered rack  Deluxe case      ItemDescriptionP920-S214Range:0-4" Resolution:0.001"P920-S216Range:0-6" Resolution:0.001"P920-S218Range:0-8" Resolution:0.001"P920-S212Range:0-12"   Resolution:0.001"

Item0: P920-S214
Item: P920-S216
Item2: P920-S218
Item4: P920-S212
Item3: None
Multi Anvil Micrometer

Multi Anvil MicrometerFeatures:Resolution:0.0001"Two interchangeable anvil: flat & round.Carbide face on spindle Ratchet thimbleLock nut.Satin chrome finished.ItemDescriptionP101-S100Measuring   Range:0-1"X0.0001"P101-S101Measuring   Range:1-2"X0.0001" 

Item0: P101-S100
Item: P101-S101
Item2: None
Item4: None
Item3: None
Dial Caliper Black Face

Dial Caliper Black Face, White Scale, Red NeedleFeatures:Black faces 0-6" precision stainless steel dial caliper.Satin chrome finished no glare.Stainless, hardened steel beam and jaws with lapped measuring faces.Graduation 0.001 per revolution and covered rack.Widely spaced, microfine graduations.Adjustable dial for easy reading.It is made of hardened stainless steel.With extra smooth movement.  Adjustable bezel with locking device.4-way measurements for inside, outside, depth and step.Measuring faces hardened, ground and lapped.Covered rack for longer life and chip free operation.Come with fitted plastic case.ItemDescriptionP920-B216Range:0-6", Resolution:0.001"P920-B212Range:0-12", Resolution:0.001”  

Item0: P920-B216
Item: P920-B212
Item2: None
Item4: None
Item3: None
Dual Needle  Dial Caliper

Dual Needle Precision Inch/Metric Dial Caliper, Stainless SteelHardened stainless steel Direct reading to 0.001"/0.02mm on large clear dial Utilizes two separate needles for inch or metric readings  Precision ground and micro-lapped Adjusting slide for fine adjustment Inside,outside,and depth measurements 0.100" single revolution  Outside dial-inch /  Inside dial-metricItemRangeResolutionP920-S2366”/150mm0.001”/0.02mm P920-S2388”/200mm0.001”/0.02mm P920-S23212”/300mm0.001”/0.02mm

Item0: P920-S236
Item: P920-S238
Item2: P920-S232
Item4: None
Item3: None
Electronic Digital Caliper  1/128

Full Screen Yellow LCD Electronic Digital Caliper, Metric/Inch/Fractional, 1/128Feature:Metric/Inch/Fractional system interchangeable. Power ON/OFF (auto off 5 minutes) Zero setting at any position. Auto or manual power off. Power: 3V CR2025Data output. ItemRangeResolutionTolerance1110-18186”   /150mm0.0005”/0.01mm±0.03mm1110-18288”   /200mm0.0005”/0.01mm±0.03mm1110-183812”   /300mm0.0005”/0.01mm±0.03mm

Item0: 1110-1818
Item: None
Item2: None
Item4: None
Item3: None
Magnetic Back For Dial Indicator (Direct Mount)

MAGNETIC BACK FOR DIAL INDICATOR (DIRECT MOUNT)Features:● Permanent powerful magnet.● Size: 2-1/4" diameter x 9/16" thickes.● Attaches to the back of 2" diameter dial indications.● Strong magnet with 44lbs of holding power.ItemDescriptionEG08-1605Magnetic back onlyEG08-1600Magnetic back with 0-1"x0.001" dial indicator   (P900-S102)

Item0: EG08-1605
Item: EG08-1600
Item2: None
Item4: None
Item3: None
Extender Dial Bore Gage

Extender Dial Bore GageFeatures:● Combining two most popular bore gage ranges into one   set by interchangeable contact point head● AGD group 2 dial indicator with 0-0.25" measure range   in 0.0005" graduation● Self centering dial indicator is fully protected by   rugged cover● Insulated grip with chrome plated handle● Stainless steel ball contact point for   durability● Indicating spacer and anvil sizes to select   specific rangeItemDescriptionEE20-1406Range:1.4-6"   x 0.0005"

Item0: EE20-1406
Item: None
Item2: None
Item4: None
Item3: None
Electronic Digital Test Indicator

Electronic Digital Test IndicatorReads to 0.0005"(0.01mm) or 0.0001"(0.001mm)Features:The digital test indicator offers easy reading,gear-less measurements in both inch and metric display without the need to read a vernier. The easy glide action provides the smoothness and feel to  make accurate measurements. Measurement data can be exported to an external data processorInch/mm conversion with the push of a buttonOff/on power buttonZero buttonTolerance buttonRange: ±0.02"/±0.5mmResolution: 0.0001" /0.001mm

Item0: P900-S129
Item: None
Item2: None
Item4: None
Item3: None
Mini Universal Indicator Holder

Mini Universal Indicator HolderFeatures:Reach from 0 to 12" diameterA simplified version of the popular usageTwo holder in one: its parts allow it be assembled also as a cylinder holderThree point adjustmentsItemDescriptionHE20-1502Mini Universal Indicator Holder

Item0: HE20-1502
Item: None
Item2: None
Item4: None
Item3: None
Universal Indicator Holder

Universal Indicator HolderFeatures:● Clamping dia.1-7/8"● Arm length from clamp 4-1/2".● Provides readings accurately   and quickly● Accepts all indicators with 5/32"   shank or dovetail. Reach from 0-12" diameter.ItemDescriptionHE20-1501Indicator is not inclued.P900-S185Universal Indicator Holder +0.03x0.0005" Dia test   indicator(=HE20-1501+P900-S108)

Item0: HE20-1501
Item: P900-S185
Item2: None
Item4: None
Item3: None
Universal Dovetail Indicator Holder

Universal Dovetail Indicator Holder Dial Test Indicator AccessoryApplications:Used with all test indicators & probes with dovetails.Access places & angles that were impossible to reach.Easily held in a collet, chuck or height gage.Features:Shank diameter: 1/4"Overall length: 3", with 360° swivelA must for every Q.C. or production facility.ItemDescriptionEG01-5459Shank diameter: 1/4" Overall length: 3"

Item0: EG01-5459
Item: None
Item2: None
Item4: None
Item3: None
Micrometer Stand

Micrometer StandFeatures:Item #S907-C153Folding design for portable useClamp can be adjusted and locked in any positionItem #EG10-1430A heavy micrometer standMade of cast ironCan be adjusted to any positionItem #C153-EG010-1" ultra-precision M-type outside micrometer, with micrometer standEG00-0001 as Page 06Item #C153-MD01Electronic digital outside micrometer 0-1"/0-25mm, with micrometer StandMD71-0001 as Page 07ItemDescriptionS907-C153Micrometer StandEG10-1430Micrometer StandC153-EG010-1" ultra-precision M-type outside micrometer, with   micrometer standC153-MD01Electronic digital outside micrometer 0-1"/0-25mm,with   micrometer Stand

Item0: S907-C153
Item: EG10-1430
Item2: C153-EG01
Item4: C153-MD01
Item3: None
Hoizontal Test Indicator, IP65 Water Resistant

Hoizontal Test Indicator, IP65 Water ResistantFeatures:● Protection level: IP65● Range: 0.060"● Graduation: 0.0005"● Dial reading: 0-15-0● Dial diameter: 1.5"● Jewelled movement● 210° swivel arc● Revolution counter● Easy-to-read tilted dial● Automatic reversal● Tungsten carbide point:   0.080"● Includes 2 dovetail   stems: 3/8" and 5/32" ItemDescription5256-2002Range: 0.060", Graduation: 0.0005"

Item0: 5256-2002
Item: None
Item2: None
Item4: None
Item3: None
Product
info@zzwtools.com

ZZW PRECISION TOOL SUPPLY (SHANGHAI)CO.,LTD

Add: #4F, No.6 Building, #528 RuiQing Rd., East ZhangJiang, 

PuDong 201201, Shanghai,P.R.China  





Moblin Link