Digital Quick Micrometer Absolute Origin Speed Mic Snap Indicating Lever Action Gage IP65 Coolant Proof, Built In Wireless TransmissionFeatures:Absolute originNo rotating spindle and avoid scratch partsQuickly measure with super high precision lever activated - fully opens and closes in less than one second. Fixed thimbleMeasuring range: 0-1"/0-25mmCarbide tipped spindleIP65 protection levelResolution: 0.00005"/0.001mm; Accuracy: ±0.00015"/0.003mmBuilt in wireless transmission (blue tooth)Ball attachment Included.3V lithium batteryFitted case includedItemDescriptionMD10-0001Range:   0-1"/0-25mm, Resolution: 0.00005"/ 0.001mm,Accuracy:   0.00015"/ 0.003mmMD10-0002Range: 1-2"/ 25-50mm, Resolution:   0.00005"/ 0.001mm, Accuracy: 0.00015"/ 0.003mmMD10-0003Range: 2-3"/ 50-75mm, Resolution:   0.00005"/ 0.001mm, Accuracy: 0.00015"/ 0.003mmMD10-0004Range: 3-4"/75-100mm, Resolution:   0.00005"/ 0.001mm, Accuracy: 0.00015"/ 0.003mm

Multi Anvil MicrometerFeatures:Resolution:0.0001"Two interchangeable anvil: flat & round.Carbide face on spindle Ratchet thimbleLock nut.Satin chrome finished.ItemDescriptionP101-S100Measuring   Range:0-1"X0.0001"P101-S101Measuring   Range:1-2"X0.0001" 

Micrometer StandFeatures:Item #S907-C153Folding design for portable useClamp can be adjusted and locked in any positionItem #EG10-1430A heavy micrometer standMade of cast ironCan be adjusted to any positionItem #C153-EG010-1" ultra-precision M-type outside micrometer, with micrometer standEG00-0001 as Page 06Item #C153-MD01Electronic digital outside micrometer 0-1"/0-25mm, with micrometer StandMD71-0001 as Page 07ItemDescriptionS907-C153Micrometer StandEG10-1430Micrometer StandC153-EG010-1" ultra-precision M-type outside micrometer, with   micrometer standC153-MD01Electronic digital outside micrometer 0-1"/0-25mm,with   micrometer Stand

Three-Point Internal Micrometer, Ratchet StopFeatures:Range: 0.275-0.400”Measurement can be taken closer to the bottom of the  blind bore, and can be taken into a deep hole with an  extension rod.Highly durable because of carbide-tipped contact points.Ratchet stop.Within 4”: Provided with setting rings.Over 0.5”: Titanium-plated anvils optional.Resolution:Within 0.5”: 0.0001”Over 0.5”: 0.0002”ItemDescription3150-11110.275-0.350"3150-21110.350-0.425"3150-31110.425-0.500"3150-40710.500-0.650"3150-50710.650-0.800"3150-60710.800-1.000"3150-70711.000-1.200"3150-80711.200-1.600"3150-90711.600-2.000"3151-00712.000-2.500"3151-10712.500-3.000"3151-20713.000-3.500"3151-30713.500-4.000"

Digital Quick Blade Micrometer,Absolute Origin Speed Mic, IP65 Coolant Proof, Built In Wireless TransmissionFeatures:Adapt to measuring the dimension that is not easy to measureAbsolute originNo rotating spindle and avoid scratch partsQuickly measure with super high precision lever activated - fully opens and closes in less than one second. Fixed thimbleCarbide tipped spindleIP65 protection levelResolution: 0.00005"/0.001mm; Accuracy: ±0.00015"/0.003mmBuilt in wireless transmission (blue tooth)Ball attachment Included.3V lithium batteryFitted case includedItemDescriptionMD70-0001Range: 0-1"/0-25mm, Resolution: 0.00005"/   0.001mm, Accuracy: 0.00015"/ 0.003mmMD70-0002Range: 1-2"/ 25-50mm, Resolution: 0.00005"/   0.001mm, Accuracy: 0.00015"/ 0.003mmMD70-0003Range: 2-3"/ 50-75mm, Resolution: 0.00005"/   0.001mm, Accuracy: 0.00015"/ 0.003mm

Blade Micrometer With Lamellar Measuring FaceFeatures:Resolution:0.0001"Non-rotating spindleBlade penetration=0.315"Blade thickness=0.03"Blade width=0.256"ItemDescription2012-1001Measuring Range:0-1",Accuracy:0.00015"2012-2001Measuring Range:1-2",Accuracy:0.00015"

0-6"x4" Base Electronic Digital Depth MicrometerFeatures:Protection level: IP65.Interchangeable rods provide a wide measuring range.High accuracy interchangeable rods enable that reading does not have to be reset after changing rods.Accuracy: ±0.003mmResolution: 0.0005".Range: 0-6"Base: 4"Number of rods: 6  ItemDescriptionP103-0178Range: 0-150mm/0-6”, Accuracy: ±0.003mm

Large Screen Electronic Digtal Outside MicrometerFeatures:Resolution:0.00005"/0.001mmLarge LCD display.Three large buttons to operate Carbide tipped measuring faces; Auto power off Zero setting at any position Metric/Inch system interchange at any position With data output interface Data hold function Relative measurement and Absolute measurement interchange at any position May be used to determine if the value of the  measured item's dimension is in the predetermined range of the micrometer ItemDescriptionC085-0001Range:0-25mm/0-1",Resolution:0.001mm/0.00005

Mechanical Digital Outside MicrometerFeatures:Resolution:0.0001"Rapid and simple readingCarbide facesPositive locking nutAnvil and spindle are both  hardened and groundMicro-lap finish on endsFast zero adjustment0.250" measuring faceNice plastic fitted case    ItemDescriptionBC20-1101Range:0-1",Accuracy:0.004mmBC20-2101Range:1-2",Accuracy:0.004mmBC20-3101Range:2-3",Accuracy:0.005mm

Electronic Digital Blade MicrometerFeatures:Resolution:0.00005"/0.001mm.Inch/mm conversion.ABS/INC switchable.Reset/PresetHold function for max.or min.values.Non-rotating spindle.Blade penetration=0.315".Blade thickness=0.03".Blade width=0.256".ItemDescription2312-1010Measuring Range: 0-25mm/0-1"   Accuracy:±0.002mm2312-2010  Measuring Range: 25-50mm/1-2",   Accuracy:±0.002mm2312-3010 Measuring Range:50-75mm/2-3",   Accuracy:±0.003mm2312-4010  Measuring Range:   75-100mm/3-4",Accuracy:±0.003mm2312-5010     Measuring Range: 100-125mm/4-5",   Accuracy:±0.003mm

0-6"x4" Base Depth MicrometerFeatures:Interchangeable rods provide a wide measuring range.High accuracy interchangeable rods enable that reading does not have to be reset when changing rods.Resolution: 0.01mm(metric); 0.001”(Inch).Range: 0-6”Base: 4”Number of rods: 6  ItemDescription2025-4201Range:   0-6"; Accuracy: 0.0002"

Electronic Digital Micrometer 2 Keys, IP54, Ratchet Friction Thimable TypeFeatures:Resolution:0.00005"/0.001mmProtection level IP54. Display data is origional data of absolute measurement after changing battery. Function:Power switch;origional data set;  inch/mm conversion;Absolute and incremental  measurement conversion; data output.Chrome-painted or painted frame, carbide measuring faces.Direct RS-232 output.ItemDescription1320-1534Range：0-25mm/0-1",Accuracy:±0.004mm1321-2534Range：25-50mm/1-2",Accuracy:±0.004mm1322-3534Range：50-75mm/2-3",Accuracy:±0.005mm1323-4534Range：75-100mm/3-4",Accuracy:±0.005mm1324-5534Range：100-125mm/4-5",Accuracy:±0.006mm1325-6534Range：125-150mm/5-6",Accuracy:±0.006mm

Inside MicrometerFeatures:Resolution:0.001". Satin chrome finished.Hardened & ground faces.Ratchet stop, locking clamp.Easily adjusted for side movement of jaw.ItemDescriptionEG00-3221Range:0.2-1.2"EG00-3222Range:1-2"EG00-3223Range:2-3"EG00-3224Range:3-4"EG00-3225Range:4-5"EG00-3226Range:5-6"EG00-3227Range:6-7"EG00-3228Range:7-8"EG00-3229Range:8-9"EG00-3230Range:9-10"EG00-3231Range:10-11"EG00-3232Range:11-12"

Ultra-Precision M-Type Outside Micrometer (6pcs & 12pcs Set)Features:Resolution:0.01mmRatchet Stop Carbide tipped Complete with standard  ItemDescriptionEG00-9150Range0-150mm,Grad:0.01mm,6pcs/setEG00-1300Range:0-300mm,Grad:0.01mm,12pcs/set

Inside Micrometer SetFeatures:Resolution:0.001"Use to measure 3 flute cutting heads such as end mills, taps and reamers.Carbide V surfaces Rod diameter:0.61"Each interchangeable rod is marked with its measuring rangesNice wooden fitted case.ItemDescription3011-2051Range:2-6" Extension   rods:0.5",1",2"3011-3051Range:2-12" Extension   rods:0.5",1",2"(2pcs),4"3011-4051Range:2-20" Extension   rods:0.5",1",2"(2pcs),4",8"3011-5051Range:2-24" Extension   rods:0.5",1",2",4",6",8"3011-6051Range:2-40" Extension   rods:0.5",1",2"(2pcs),4",6",8"12"3011-7051Range:2-60" Extension   rods:0.5",1",2"(2pcs),4",6",8"(2pcs),12"(2pcs)