Precision Screwless Vise

Precision Screwless ViseFeatures:Hardened and stabilized Precision ground to a mirror finish Simple operation and extremely versatile Squareness and parallelism are approx. ±0.0002" on critical sides ItemDescription0235-0302ize:2",Total   Length:5.51",Total Ht.:1.96",Jaw Opening:2.56"0235-0303Size:3",Total   Length:7.48",Total Ht.:2.75",Jaw Opening:3.93"0235-0304Size:4",Total   Length:9.64",Total Ht.:3.54",Jaw Opening:4.92"

Item0: 0235-0302
Item: 0235-0303
Item2: 0235-0304
Item4: None
Item3: None
ER Collet System With CAT40 or BT40 Chuck

ER Collet System With CAT40 or BT40 Chuck Balancing Grade G6.3/12,000RPMItem: CT40-ER40● 15pcs ER40 collet set includes thefollowing collet sizes:1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2,9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, & 1"● 1pc spanner + 1pc clamping nut● CAT40-ER40-80mm chuck holderItem: BT40-ER40● 15pcs ER40 collet set includes the followingcollet sizes:1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2,9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, & 1"● 1pc spanner + 1pc clamping nut● BT40-ER40-80mm chuck holderItem: BT40-ER32● 12pcs ER32 collet set includes the followingcollet sizes:3/32, 1/8, 3/16, 1/4, 5/16, 3/8, 7/16,3/4, 9/16, 5/8, 21/32, & 11/16".● 1pc spanner + 1pc clamping nut● BT40-ER32-70mm chuck holderItem: CT40-ER32● 12pcs ER32 collet set includes the followingcollet sizes:3/32, 1/8, 3/16, 1/4, 5/16, 3/8,7/16, 3/4, 9/16, 5/8, 21/32, & 11/16".● 1pc spanner + 1pc clamping nut● CT40-ER32-70mm chuck holderItemDescriptionCT40-ER4015pc ER40 chucks setCT40-ER3212pc ER32 chucks setBT40-ER4015pc ER40 chucks setBT40-ER3212pc ER32 chucks set

Item0: CT40-ER40
Item: CT40-ER32
Item2: BT40-ER40
Item4: BT40-ER32
Item3: None
R8 Precision Shell End Mill Adaptor

R8 Precision Shell End Mill AdaptorFeatures:For the bridge port - 7/16"-20Drawbar threadHold face mill.ItemDescriptionFG22-8032D: 1/2", L: 5.90", Range Diameter:   1-1/4"-1-1/2"FG22-8048D: 3/4", L: 6.06", Range Diameter: 1-3/4"-2"FG22-8064D: 1", L: 6.10", Range Diameter:   2-1/4"-2-3/4"FG22-8080D: 1-1/4", L: 6.14", Range Diameter:   3"-3-1/2"FG22-8096D: 1-1/2", L: 6.41", Range Diameter: 4"-5"

Item0: FG22-8032
Item: FG22-8048
Item2: FG22-8064
Item4: FG22-8080
Item3: FG22-8096
5C Hex Collet 7pc Set

5C Hex Collet 7pc SetFeatures:7pcs/set: 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 7/8".Made of high quality spring steelHardened and precision groundCollet end OD & ID threadedAccuracy: 0.0005" TIRItemDescription0223-03097pcs/set: 1/4", 5/16", 3/8", 1/2",   5/8", 3/4", 7/8"

Item0: 0223-0309
Item: None
Item2: None
Item4: None
Item3: None
BT40,CAT40 ER Floating Tap Collet Chuck

Premium Series,BT40,CAT40 ER Floating Tap Collet ChuckFeatures:Ideal for holding taps and reamers forlight duty tapping tasks0.197 compression and 0.315 extensive travelsvia adjustable internal springsUsing standard ER colletAll critical surfaces precision groundMade from alloy steel hardened to 54-56 HRCRear thread for pull stud:CAT40: 5/8 " -11BT40: M16 x 2ItemDescription0537-5983Taper: CAT40, Collet Series: ER16, D: 1.10", L:   3.020", Compression(F1): 0.197", Extension(F2): 0.315"0537-5984Taper: CAT40, Collet Series: ER20, D: 1.34", L:   3.386", Compression(F1): 0.197", Extension(F2): 0.315"0537-5985Taper: CAT40, Collet Series: ER32, D: 1.65", L:   3.543", Compression(F1): 0.197", Extension(F2): 0.315"0537-6566Taper: BT40, Collet Series: ER16, D: 1.10", L:   3.031", Compression(F1): 0.197", Extension(F2): 0.315"0537-6577Taper: BT40, Collet Series: ER32, D: 1.65", L:   3.543", Compression(F1): 0.197", Extension(F2): 0.315"

Item0: 0537-5983
Item: 0537-5984
Item2: 0537-5985
Item4: 0537-6566
Item3: 0537-6577
Premium Series, V-Flange ER Collet Chuck

Premium Series, V-Flange ER Collet Chuck,Balanced to 20,000 RPM at G2.5Features:All ground bodyMade from alloy steel hardened to HRC 52-56Taper accurately ground exceeding AT3 standardFactory balanced to save spindle life, and tool life,and increased productivity.Concentricity less than 0.0002” from taper to collet faceCertification included with each holder, documented TIR,taper accuracy, and balance measurement.Coolant through capacityDraw bar thread CAT-40: 5/8"-11 BT40: M16x2Balanced to 20,000 RPM at G2.5Wrench not includedItemDescription2001-0005Taper: CAT40, Collet Series: ER16, Projection Length:   2.76", Range: 1/32"-3/8"2001-0010Taper: CAT40, Collet Series: ER16, Projection Length:   4", Range: 1/32"-3/8"2001-0025Taper: CAT40, Collet Series: ER20, Projection Length:   2.76", Range: 1/16"-1/2"2001-0030Taper: CAT40, Collet Series: ER20, Projection Length:   4", Range: 1/16"-1/2"2001-0015Taper: CAT40, Collet Series: ER32, Projection Length:   2.76", Range: 3/32"-25/32"2001-0020Taper: CAT40, Collet Series: ER32, Projection Length:   4", Range: 3/32"-25/32"2001-0035Taper: CAT40, Collet Series: ER40, Projection Length:   2.76", Range: 1/8"-1"2001-0040Taper: CAT40, Collet Series: ER40, Projection Length:   4", Range: 1/8"-1"3001-0020Taper: BT40, Collet Series: ER32, Projection Length:   4", Range: 3/32"-25/32"

Item0: 2001-0005
Item: 2001-0010
Item2: 2001-0025
Item4: 2001-0015
Item3: 2001-0020
One Pair Magnetic Chuck Parallels 2ps/Pair

One Pair Magnetic Chuck Parallels 2ps/PairApplications:● "V" blocks are universal (hold in any direction on   a magnetic chuck).Features:● Cast integrally with aluminum to ensure the   blocks will never crack or become loose    even when accidentally dropped.● Steel used is selected for the highest magnetic    transfer and low retention of magnctic flux.Includes:Model # 1●1"x2"x4" micro parallels ground all overand serial numbered in pairs.ItemDescriptionEG06-2001One Pair Magnetic Chuck Parallels

Item0: EG06-2001
Item: None
Item2: None
Item4: None
Item3: None
Universal "V" Block

Universal "V" BlockFeatures:● Cast integrally with aluminum to ensure the   blocks will never crack or become loose    even when accidentally dropped.● Steel used is selected for the highest mangnetic    transfer and low retention of magnctic flux.● "V" blocks are universal (hold in any direction    on a magnetic chuck).● Two V's: 1-7/8"x2-3/8"x2".● Large V: 2" round capacity.● Small V: 1/2" round capacity.ItemDescriptionEG06-2004Universal "V" block

Item0: EG06-2004
Item: None
Item2: None
Item4: None
Item3: None
Precision Angle Plate

Precision Angle PlateFeatures:Solid one-piece steel construction Hardened to Rc58-62 Ground flat, square and parallel to 0.0002" ItemDescription2200-0901Size:4"x3"x3"; Thick: 1"; Number of   holes: 13Tapped 1/4"-202200-0903Size:4"x4"x4"; Thick: 1-1/4"; Number of   holes: 13Tapped 1/4"-202200-0904Size:6"x6"x4"; Thick: 1-1/4"; Number of   holes: 26Tapped 1/4"-20

Item0: 2200-0901
Item: 2200-0903
Item2: 2200-0904
Item4: None
Item3: None
ER 32 Collet Chuck

ER 32 Collet ChuckFeatures:Compatible with: CNC Milling Lathe Tool Engraving MachineMount to your choice of backplate to use on a lathe.Can also be used as a fixture on a milling table.It is supplied with a wrench and a nutItemDescriptionER32-0080D1:3.149",D:2.165",L:1.653",d:1.259"ER32-0100D1:3.937",D:2.834",L:1.653",d:1.259"

Item0: ER32-0080
Item: ER32-0100
Item2: None
Item4: None
Item3: None
Hex ER-32 Collet Block

Hex ER-32 Collet BlockFeatures:Use standard ER collets for fast set-ups on CNC machinesFor parallel, square or hex shapes as well as for cross-hole drilling at 60, 90 or 120 degreesMade of Alloy tool steel hardened and ground to 0.0005" flatness, sureness and parallelismMay be used standing uprightBlock dimensions are approximately 1-3/4" x 1-3/4" x 2-3/4" long.15/16" through hole allows for long parts to be machined.ER nut included.ItemDescription6920-32061-3/4" x 1-3/4" x 2-3/4"

Item0: 6920-3206
Item: None
Item2: None
Item4: None
Item3: None
Square ER-32 Collet Block

Square ER-32 Collet BlockFeatures:Use standard ER collets for fast set-ups on CNC machinesFor parallel, square or hex shapes as well as for cross-hole drilling at 60, 90 or 120 degreesMade of Alloy tool steel hardened and ground to 0.0005" flatness, sureness and parallelismMay be used standing uprightBlock dimensions are approximately 1-3/4" x 1-3/4" x 2-3/4" long.15/16" through hole allows for long parts to be machined.ER nut included.ItemDescription6920-32041-3/4" x 1-3/4" x 2-3/4"

Item0: 6920-3204
Item: None
Item2: None
Item4: None
Item3: None
90° Square Shoulder Indexable Face Mill

3" Dia. 7 Flute, 90° Square Shoulder Indexable Face Mill With 7Pcs APKT1604 Inserts With Caterpillar V-Flange CAT-40 Face Mill HolderFeatures:● All "V" flange tooling are interchangeable with brown & sharp,   burgmaster, carboloy, cincinnati milacron, de vlieg, erickson,   excelled, mooggy, print & whiney, universal, valence,   white sand strand and other machining centers.● Shank: CAT40 x 1" - 2-1/16"● Draw bar thread: 5/8"-11● 6780-7104 as Page 24, 58Features:● Cutting diameter: 3"● 90° cutting angle● Screw down insert● Radial rake angle: -10°● Axial rake angle: +7°● All types of square shoulder face milling,   side milling and full slot milling (shaft end   mills) of steels, alloyed steels, stainless   and heat resistant steels, case irons and   aluminum alloys.● 4508-0018 as Page 63ItemDescription7104-4518Shank: CAT40 x 1" - 2-1/16"; Cutting diameter: 3"

Item0: 7104-4518
Item: None
Item2: None
Item4: None
Item3: None
ISO40 Holder For ER40 Collet, With Thread 5/8"-11, Length:100mm

ISO40 Holder For ER40 Collet, With Thread 5/8"-11, Length:100mmItemDescription0536-0004ISO40 holder for ER40 collet, with thread   5/8"-11,length:100mm

Item0: 0536-0004
Item: None
Item2: None
Item4: None
Item3: None
3/4" Straight Shank ER16 Collet Chucks

3/4" Straight Shank ER16 Collet ChucksFeatures:Made of high quality alloy steelHardened to RC56 - 60Precision ground0.0002" TIR or betterItemDescription0223-0207Collet Capacity: 0.02"-0.393"0223-0208Collet Capacity: 0.02"-0.393"0223-0209Collet Capacity: 0.02"-0.393"

Item0: 0223-0207
Item: 0223-0208
Item2: 0223-0209
Item4: None
Item3: None
Product
info@zzwtools.com

ZZW PRECISION TOOL SUPPLY (SHANGHAI)CO.,LTD

Add: #4F, No.6 Building, #528 RuiQing Rd., East ZhangJiang, 

PuDong 201201, Shanghai,P.R.China  





Moblin Link