Circul Permanent Magnetic ChuckFeatures:The round fine pitch permanent magnet chuck is suitable for grinder and lathe, best for longer and thicker workpieceThe round micro pitch permanent magnetic chuck is suitable for grinding application, best for smaller and thinner workpiece.High holding power: max 140lbs/sq.in.Steel pole spacing: 1/16", brass pole spacing: 1/32"ItemDescription1151-1150D:7.874",H:2.008",K:0.079",C:6.299",E:7.087",Z-M:4xM8,Weight:10kg1151-2200D:6.299",H:1.929",K:0.079",C:4.921",E:5.512",Z-M:4xM8,Weight:6.5kg
Sine DresserFeatures:Cross feed up to 50mm Center distance is 50mm within 0.01mm accuracy Dresses grinding wheel to any angle from 0 to 60 degreeEasy structure and easy operation, the drinding wheel dresser can be adjusted within 0-60°， the tolerance distance between two spindles is ±0.01mm, high accuracy and quality, it can dress any angles of wheel surface by its horizontal and vertical.ItemDescription2310-7000Sine Dresser
Radius And Angle DresserMaximum diameter of wheel 12" Convex radii 0-1-5/8" Concave radii 0-4" Tangent travel, either side of center 2" Center line of tool 3.4" Overall length 16.61" Weight 30lbs. ItemDescriptionHE30-0005Radius And Angle Dreser
Fine Pole Magnetic Chuck1-5/8" Very low profile to allow Max.work height clearance Fine pole: 1/8" Poles and 1/16" separators Use Rare Earth Ceramic Magnets inside for superior holding power Sealed against dirt and liquids Flate and parallel within 0.0002" With two precision ground rails ItemDescription2720-1000Size:6" x 6"2720-2000Size:4" x 4"