R8 Precision Shell End Mill Adaptor

R8 Precision Shell End Mill AdaptorFeatures:For the bridge port - 7/16"-20Drawbar threadHold face mill.ItemDescriptionFG22-8032D: 1/2", L: 5.90", Range Diameter:   1-1/4"-1-1/2"FG22-8048D: 3/4", L: 6.06", Range Diameter: 1-3/4"-2"FG22-8064D: 1", L: 6.10", Range Diameter:   2-1/4"-2-3/4"FG22-8080D: 1-1/4", L: 6.14", Range Diameter:   3"-3-1/2"FG22-8096D: 1-1/2", L: 6.41", Range Diameter: 4"-5"

Item0: FG22-8032
Item: FG22-8048
Item2: FG22-8064
Item4: FG22-8080
Item3: FG22-8096
BT40,CAT40 ER Floating Tap Collet Chuck

Premium Series,BT40,CAT40 ER Floating Tap Collet ChuckFeatures:Ideal for holding taps and reamers forlight duty tapping tasks0.197 compression and 0.315 extensive travelsvia adjustable internal springsUsing standard ER colletAll critical surfaces precision groundMade from alloy steel hardened to 54-56 HRCRear thread for pull stud:CAT40: 5/8 " -11BT40: M16 x 2ItemDescription0537-5983Taper: CAT40, Collet Series: ER16, D: 1.10", L:   3.020", Compression(F1): 0.197", Extension(F2): 0.315"0537-5984Taper: CAT40, Collet Series: ER20, D: 1.34", L:   3.386", Compression(F1): 0.197", Extension(F2): 0.315"0537-5985Taper: CAT40, Collet Series: ER32, D: 1.65", L:   3.543", Compression(F1): 0.197", Extension(F2): 0.315"0537-6566Taper: BT40, Collet Series: ER16, D: 1.10", L:   3.031", Compression(F1): 0.197", Extension(F2): 0.315"0537-6577Taper: BT40, Collet Series: ER32, D: 1.65", L:   3.543", Compression(F1): 0.197", Extension(F2): 0.315"

Item0: 0537-5983
Item: 0537-5984
Item2: 0537-5985
Item4: 0537-6566
Item3: 0537-6577
Premium Series, V-Flange ER Collet Chuck

Premium Series, V-Flange ER Collet Chuck,Balanced to 20,000 RPM at G2.5Features:All ground bodyMade from alloy steel hardened to HRC 52-56Taper accurately ground exceeding AT3 standardFactory balanced to save spindle life, and tool life,and increased productivity.Concentricity less than 0.0002” from taper to collet faceCertification included with each holder, documented TIR,taper accuracy, and balance measurement.Coolant through capacityDraw bar thread CAT-40: 5/8"-11 BT40: M16x2Balanced to 20,000 RPM at G2.5Wrench not includedItemDescription2001-0005Taper: CAT40, Collet Series: ER16, Projection Length:   2.76", Range: 1/32"-3/8"2001-0010Taper: CAT40, Collet Series: ER16, Projection Length:   4", Range: 1/32"-3/8"2001-0025Taper: CAT40, Collet Series: ER20, Projection Length:   2.76", Range: 1/16"-1/2"2001-0030Taper: CAT40, Collet Series: ER20, Projection Length:   4", Range: 1/16"-1/2"2001-0015Taper: CAT40, Collet Series: ER32, Projection Length:   2.76", Range: 3/32"-25/32"2001-0020Taper: CAT40, Collet Series: ER32, Projection Length:   4", Range: 3/32"-25/32"2001-0035Taper: CAT40, Collet Series: ER40, Projection Length:   2.76", Range: 1/8"-1"2001-0040Taper: CAT40, Collet Series: ER40, Projection Length:   4", Range: 1/8"-1"3001-0020Taper: BT40, Collet Series: ER32, Projection Length:   4", Range: 3/32"-25/32"

Item0: 2001-0005
Item: 2001-0010
Item2: 2001-0025
Item4: 2001-0015
Item3: 2001-0020
ER 32 Collet Chuck

ER 32 Collet ChuckFeatures:Compatible with: CNC Milling Lathe Tool Engraving MachineMount to your choice of backplate to use on a lathe.Can also be used as a fixture on a milling table.It is supplied with a wrench and a nutItemDescriptionER32-0080D1:3.149",D:2.165",L:1.653",d:1.259"ER32-0100D1:3.937",D:2.834",L:1.653",d:1.259"

Item0: ER32-0080
Item: ER32-0100
Item2: None
Item4: None
Item3: None
Hex ER-32 Collet Block

Hex ER-32 Collet BlockFeatures:Use standard ER collets for fast set-ups on CNC machinesFor parallel, square or hex shapes as well as for cross-hole drilling at 60, 90 or 120 degreesMade of Alloy tool steel hardened and ground to 0.0005" flatness, sureness and parallelismMay be used standing uprightBlock dimensions are approximately 1-3/4" x 1-3/4" x 2-3/4" long.15/16" through hole allows for long parts to be machined.ER nut included.ItemDescription6920-32061-3/4" x 1-3/4" x 2-3/4"

Item0: 6920-3206
Item: None
Item2: None
Item4: None
Item3: None
Square ER-32 Collet Block

Square ER-32 Collet BlockFeatures:Use standard ER collets for fast set-ups on CNC machinesFor parallel, square or hex shapes as well as for cross-hole drilling at 60, 90 or 120 degreesMade of Alloy tool steel hardened and ground to 0.0005" flatness, sureness and parallelismMay be used standing uprightBlock dimensions are approximately 1-3/4" x 1-3/4" x 2-3/4" long.15/16" through hole allows for long parts to be machined.ER nut included.ItemDescription6920-32041-3/4" x 1-3/4" x 2-3/4"

Item0: 6920-3204
Item: None
Item2: None
Item4: None
Item3: None
90° Square Shoulder Indexable Face Mill

3" Dia. 7 Flute, 90° Square Shoulder Indexable Face Mill With 7Pcs APKT1604 Inserts With Caterpillar V-Flange CAT-40 Face Mill HolderFeatures:● All "V" flange tooling are interchangeable with brown & sharp,   burgmaster, carboloy, cincinnati milacron, de vlieg, erickson,   excelled, mooggy, print & whiney, universal, valence,   white sand strand and other machining centers.● Shank: CAT40 x 1" - 2-1/16"● Draw bar thread: 5/8"-11● 6780-7104 as Page 24, 58Features:● Cutting diameter: 3"● 90° cutting angle● Screw down insert● Radial rake angle: -10°● Axial rake angle: +7°● All types of square shoulder face milling,   side milling and full slot milling (shaft end   mills) of steels, alloyed steels, stainless   and heat resistant steels, case irons and   aluminum alloys.● 4508-0018 as Page 63ItemDescription7104-4518Shank: CAT40 x 1" - 2-1/16"; Cutting diameter: 3"

Item0: 7104-4518
Item: None
Item2: None
Item4: None
Item3: None
ISO40 Holder For ER40 Collet, With Thread 5/8"-11, Length:100mm

ISO40 Holder For ER40 Collet, With Thread 5/8"-11, Length:100mmItemDescription0536-0004ISO40 holder for ER40 collet, with thread   5/8"-11,length:100mm

Item0: 0536-0004
Item: None
Item2: None
Item4: None
Item3: None
3/4" Straight Shank ER16 Collet Chucks

3/4" Straight Shank ER16 Collet ChucksFeatures:Made of high quality alloy steelHardened to RC56 - 60Precision ground0.0002" TIR or betterItemDescription0223-0207Collet Capacity: 0.02"-0.393"0223-0208Collet Capacity: 0.02"-0.393"0223-0209Collet Capacity: 0.02"-0.393"

Item0: 0223-0207
Item: 0223-0208
Item2: 0223-0209
Item4: None
Item3: None
HSK63A- ER Collet Chuck Balancing Grade G2.5/25,000RPM

HSK63A- ER Collet Chuck Balancing Grade G2.5/25,000RPMFeatures:Dynamically balanced to G2.5 25,000 RPM to meet today's demanding need in aggressive high speed machining In a generic standard ER collet nut, an internal ring is off-centered so that an ER collet can be easily snapped into it and holds the ER collet in place.  To minimize this off-centering, the ER collet nut is optimized to distribute the flat sides' area to off-set the off-center. ER collet nut is also balanced with each holderMade from alloy steel harden to HRc 52-56All critical surface are precision groundConcentricity is less than 0.0001" from taper to end mill pocketEach holder comes with a lab certificate on its taper accuracy and runout measurementCoolant through capability ItemDescription4001-8466Taper:HSK63A,   Collet Series:ER16, Nut Diameter:1.10", Projection Length: 3.15",   Range: 1/32"-3/8"4001-8467Taper:HSK63A,   Collet Series:ER16, Nut Diameter:1.10", Projection Length: 3.94",   Range: 1/32"-3/8"4001-8468Taper:HSK63A,   Collet Series:ER16, Nut Diameter:1.10", Projection Length: 6.30",   Range: 1/32"-3/8"4001-8469Taper:HSK63A,   Collet Series:ER20, Nut Diameter:1.34", Projection Length: 6.30",   Range: 1/16"-1/2"4001-8479Taper:HSK63A,   Collet Series:ER32, Nut Diameter:1.97", Projection Length: 3.94",   Range: 3/32"-25/32"4001-8470Taper:HSK63A,   Collet Series:ER40, Nut Diameter:2.48", Projection Length: 3.15",   Range: 1/8"-1"4001-8471Taper:HSK63A,   Collet Series:ER40, Nut Diameter:2.48", Projection Length: 4.72",   Range: 1/8"-1"

Item0: 4001-8466
Item: 4001-8468
Item2: 4001-8479
Item4: 4001-8470
Item3: 4001-8471
Pull Stud Retention Knobs For V-Flange Caterpillar Tooling

Pull Stud Retention Knobs For V-Flange Caterpillar ToolingFeatures:6780-0041, 6780-0042 for Fadal, Mazak, Hurco, Okama etc.6780-1025, 6780-1044 for HAAS, Mitsubishi, Toshiba, Daewoo, OKK, Kitamura, etc.ItemDescriptionCAT405/8-11"Thread6780-0041D1: 0.740", D2:0.490", D3:0.280",   D4:0.636", L:1.625", L1:0.440", Hole6780-0042D1: 0.740", D2:0.490", D3:N/A, D4:0.636",   L:1.625", L1:0.440", Solid6780-1025D1: 0.589", D2:0.392", D3:N/A, D4:0.636",   L:2.250", L1:0.988", Solid6780-1044D1: 0.589", D2:0.392", D3:0.200",   D4:0.636", L:2.250", L1:0.988", Hole6780-0141D1: 0.740", D2:0.490", D3:N/A, D4:0.636",   L:1.625", L1:0.440", SolidCAT501/8" Thread6780-0044D1: 1.14", D2:0.820", D3:0.468", D4:N/A,   L:2.30", L1:0.70", Hole6780-0045D1: 1.14", D2:0.820", D3:N/A, D4:N/A,   L:2.30", L1:0.70", Solid6780-1055D1: 0.903", D2:0.668", D3:N/A, D4:3.080",   L:1.384", L1:1.778", Solid6780-1057D1: 0.903", D2:0.668", D3:0.390",   D4:1.026", L:3.355", L1:1.778", Hole 

Item0: 6780-0041
Item: 6780-1025
Item2: 6780-0141
Item4: 6780-0044
Item3: 6780-1057
CNC Integral High Precision Keyless Drill Chuck Holder

CNC Integral High Precision Keyless Drill Chuck Holder,with VDI Shank DIN 69880- with coolant nozzlesFeatures:-High precision and concentricity:rutout 0.03mm max.-Right and left rotation.-High gripping force with minimal sffort.-Short and sturdy design, tool shank and chuck are forming one unit.-Simple operation, quick tool change inside or outside of machine, no unintentional opening in case of sudden spindle stop or direction reversal.-Suitable for CNC and high precision machine applications.-Scope of delivery: drill chuck included wrench.-With internal collant supply available upon request lamping trough shank-Runout test of CNC drill chucks is done with a torque of approx 12Nm using the following test mandrels:13mm: Dia.:6mm,8mm & 12mm.16mm: Dia.:6mm,8mm, 12mm & 16mm.ItemShankCapacityADF340-1010VDI160.3-10mm46mm40mmF340-1110VDI200.3-10mm41mm40mmF340-1210VDI251-13mm87mm50mmF340-1310VDI301-13mm87mm50mmF340-1410VDI301-16mm92mm55mmF340-1510VDI401-13mm88mm50mmF340-1610VDI401-16mm93mm55mmF340-1710VDI501-16mm101.5mm55mm

Item0: F340-1010
Item: F340-1210
Item2: F340-1310
Item4: F340-1610
Item3: None
CNC Integral High Precision Keyless Drill Chuck Holder

CNC Integral High Precision Keyless Drill Chuck Holder,with morse taper and tang-StandardFeatures:-High precision and concentricity:rutout 0.03mm max.-Right and left rotation.-High gripping force with minimal sffort.-Short and sturdy design, tool shank and chuck are forming one unit.-Simple operation, quick tool change inside or outside of machine, no unintentional opening in case of sudden spindle stop or direction reversal.-Suitable for CNC and high precision machine applications.-Scope of delivery: drill chuck included wrench.-Standard type: without coolant-Runout test of CNC drill chucks is done with a torque of approx 12Nm using the following test mandrels:13mm: Dia.:6mm,8mm & 12mm.16mm: Dia.:6mm,8mm, 12mm & 16mm.ItemShankCapacityADF350-1010MT21-13mm80mm45mmF350-1110MT21-16mm85mm50mmF350-1210MT31-13mm80mm45mmF350-1310MT31-16mm86mm50mmF350-1410MT41-16mm86mm50mmF350-1510MT51-16mm86mm50mm

Item0: F350-1010
Item: F350-1210
Item2: F350-1410
Item4: F350-1510
Item3: None
Shank For Tapping Head

Shank For Tapping HeadItemDescription0222-0750Taper Size: 2MT Jacobs Taper: JT60222-0757Taper Size: 3MT Jacobs Taper: JT60222-0763Taper Size: 4MT Jacobs Taper: JT60222-0775Taper Size: R8 Jacobs Taper: JT6ITH5-4062Taper Size: 3MT Jacobs Taper: 20mm ThreadITH5-4064Taper Size: 4MT Jacobs Taper: 20mm ThreadITH5-4066Taper Size: R8 Jacobs Taper: 20mm Thread

Item0: 0222-0750
Item: 0222-0775
Item2: ITH5-4062
Item4: ITH5-4066
Item3: None
CNC Integral High Precision Keyless Drill Chuck Holder

CNC Integral High Precision Keyless Drill Chuck Holder,with HSK Shank DIN 69893-ADFeatures:-High precision and concentricity:rutout 0.03mm max.-Right and left rotation.-High gripping force with minimal sffort.-Short and sturdy design, tool shank and chuck are forming one unit.-Simple operation, quick tool change inside or outside of machine, no unintentional opening in case of sudden spindle stop or direction reversal.-Suitable for CNC and high precision machine applications.-Scope of delivery: drill chuck included wrench.-AD type: with internal  coolant supply-Runout test of CNC drill chucks is done with a torque of approx 12Nm using the following test mandrels:13mm: Dia.:6mm,8mm & 12mm.16mm: Dia.:6mm,8mm, 12mm & 16mm.ItemShankCapacityADF330-1010HSK63A1-13mm107mm45mmF330-1110HSK63A1-16mm112mm50mmF330-1210HSK100A1-16mm127mm50mm

Item0: F330-1010
Item: F330-1110
Item2: F330-1210
Item4: None
Item3: None
Product
info@zzwtools.com

ZZW PRECISION TOOL SUPPLY (SHANGHAI)CO.,LTD

Add: #4F, No.6 Building, #528 RuiQing Rd., East ZhangJiang, 

PuDong 201201, Shanghai,P.R.China  





Moblin Link