5C Spin Index

    5C Spin IndexItem # 0225-0204Hardened and precision-ground spindle 0.0004" TIP spindle accuracy Precision-ground 36-position index plate Direct indexing in ten steps,graduated in 5-degree increments For use on all milling machines,surface grinders,and   inspection equipment Approximate weight 18 lbs. ItemDescription0225-02045C Spin Index Index0240-0104Tail   stock for 5C spin indexitem 0240-0104

Item0: 0225-0204
Item: 0240-0104
Item2: None
Item4: None
Item3: None
Speed Handle For Machine Vise

Speed Handle For Machine ViseFeatures:3/4" Hex. hub  Move the vise jaw much faster. ItemDescription1100-8116SPEED   HANDLE FOR MACHINE VISE

Item0: 1100-8116
Item: None
Item2: None
Item4: None
Item3: None
Super Angle Lock Precision Swivel Base Milling Machine Vise

Super Angle Lock Precision Swivel Base Milling Machine ViseFeatures:● With swivel base● Removable hinged handle for fast locking● Provides better clamping pressureItemDescriptionFA20-4204Length: 13.582", Width: 8.858", Height: 4.724"FA20-4206Length: 17.322", Width: 10.944", Height: 6.023"

Item0: FA20-4204
Item: FA20-4206
Item2: None
Item4: None
Item3: None
BT40 Tool Holder Tightening Fixture

BT40 Tool Holder Tightening Fixture For Universal CNC Equipment, Double Head Anodized HardenedFeatures:Applicable model is BT40Realize Double-end Mounting, facilitate mount and dismount.Modern design, protect the conical surface of the tool holder.Sliding block positioning design, correct orientation and non-skid.Adopt new material, detailed and comprehensive protection.Match for BT40 tool holer type: BT40 L: 255mm W: 140mm H: 140mmWhen installing the CNC tools on machine tools, some parts such as tools and pull studs need to installed on tool holders. Because of the specific form of the CNC tools, the traditional tool lock seat can’t satisfy the tighten or unscrew requirement during production, assembling and using. There are an upward direction lock snap ring and a downward direction lock snap ring on the dicephalous tool lock base. They can satisfy the installation of CNC pull studs, ER nuts, and Tools, etc. from both directions.ItemDescriptionBT40-8540L: 255mm W: 140mm H: 140mm

Item0: BT40-8540
Item: None
Item2: None
Item4: None
Item3: None
CAT40 Collet Chuck Tightening Fixture

CAT40 Collet Chuck Tightening Fixture Fit CAT40 Tool Holder as Well as SK40 and JT40 HOLDERFeatures:Applicable model is CAT 40 or SK40 or JT 40Correct orientation and non-slip quench hardeningEasy to install, reliable, protect tool holder,could bear greater torque, avoid skiddingThe material is aluminum alloyNovel hollow design, protect the conical surface of the tool holder.Adopt new material, detailed and comprehensive protection.Match for CT40 tool holer type as well as SK40 and JT40When installing the CNC tools on machine tools, some parts such as tools and pull studs need to installed on tool holders.Because of the specific form of the CNC tools, the traditional tool lock seat can’t satisfy the tighten or unscrew requirement during production, assembling and using. There are an upward direction lock snap ring and a downward direction lock snap ring on the dicephalous tool lock base. They can satisfy the installation of CNC pull studs, ER nuts, and Tools, etc. from both directions.ItemDescriptionCT40-7840Applicable model is CAT 40 or SK40 or JT 40

Item0: CT40-7840
Item: None
Item2: None
Item4: None
Item3: None
58 Pcs Deluxe Steel Slamping Kit

58 Pcs Deluxe Steel Slamping Kit, Table Slot 5/8",Stud Size 1/2"-13Features:● Table slot: 5/8"● Stud size: 1/2"-13● Block width: 1"● Quality kit for a bridgeportIncluded:● 24 studs;4 pieces 3", 4", 5", 6", 7", & 8" Long● 4 coupling nuts● 6 flange nuts● 6 T-slot nuts● 6 serrated end clamps● 12 step blocks● Wall HolderItemDescription4230-262658 Pcs Deluxe Steel Slamping Kit, Table Slot 5/8",Stud   Size 1/2"-13

Item0: 4230-2626
Item: None
Item2: None
Item4: None
Item3: None
Circul Permanent Magnetic Chuck

Circul Permanent Magnetic ChuckFeatures:The round fine pitch permanent magnet chuck is suitable for grinder and lathe, best for longer and thicker workpieceThe round micro pitch permanent magnetic chuck is suitable for grinding application, best for smaller and thinner workpiece.High holding power: max 140lbs/sq.in.Steel pole spacing: 1/16", brass pole spacing: 1/32"ItemDescription1151-1150D:7.874",H:2.008",K:0.079",C:6.299",E:7.087",Z-M:4xM8,Weight:10kg1151-2200D:6.299",H:1.929",K:0.079",C:4.921",E:5.512",Z-M:4xM8,Weight:6.5kg

Item0: 1151-1150
Item: 1151-2200
Item2: None
Item4: None
Item3: None
CAT50 / SK50 / JT 50 Collet Chuck Tightening Fixture

CAT50 / SK50 / JT 50 Collet Chuck Tightening Fixture Fit CAT50 Tool HolderFeatures:Applicable model is CAT50 as well as SK50 and JT50 Tool HolderCorrect orientation and non-slip quench hardeningEasy to install, reliable, protect tool holder, could bear greater torque, avoid skiddingThe material is aluminum alloyNovel hollow design, protect the conical surface of the tool holder.Adopt new material, detailed and comprehensive protection.Match for CT50 tool holer type as well as SK50 and JT50When installing the CNC tools on machine tools, some parts such as tools and pull studs need to installed on tool holders. Because of the specific form of the CNC tools, the traditional tool lock seat can’t satisfy the tighten or unscrew requirement during production, assembling and using. There are an upward direction lock snap ring and a downward direction lock snap ring on the dicephalous tool lock base. They can satisfy the installation of CNC pull studs, ER nuts, and Tools, etc. from both directions.ItemDescriptionCT50-7850Applicable model is CAT50 as well as SK50 and JT50 Tool   Holder

Item0: CT50-7850
Item: None
Item2: None
Item4: None
Item3: None
BT30 Tool Holder Tightening Fixture

BT30 Tool Holder Tightening Fixture For Universal CNC Equipment, Double Head Anodized HardenedFeatures:Applicable model is BT30Realize Double-end Mounting, facilitate mount and dismount.The material is aluminum alloy, alloy steel composite.Easy to install, reliable, protect tool holder, could bear greater torque, avoid skiddingSliding block positioning design, correct orientation and non-skid.Adopt new material, detailed and comprehensive protection.Match for BT30 tool holer typeWhen installing the CNC tools on machine tools, some parts such as tools and pull studs need to installed on tool holders. Because of the specific form of the CNC tools, the traditional tool lock seat can’t satisfy the tighten or unscrew requirement during production, assembling and using. There are an upward direction lock snap ring and a downward direction lock snap ring on the dicephalous tool lock base. They can satisfy the installation of CNC pull studs, ER nuts, and Tools, etc. from both directions.ItemDescriptionBT30-8530Match For BT30ToolHoler Type

Item0: BT30-8530
Item: None
Item2: None
Item4: None
Item3: None
6” Double Lock Angle Tight Precision Machine Vise

6” Double Lock Angle Tight Precision Machine ViseFeatures:● Spheroidal cast iron body● Jaw width: 6"(160mm)● Jaw opening: 3.937"● Jaw depth: 1.968"● Length: 24.094"● Width: 6.299"● Height: 5.118"● Weight: 99lbsItemDescriptionFA42-124224.094"x6.299"x 5.118"

Item0: FA42-1242
Item: None
Item2: None
Item4: None
Item3: None
Mill Stop

Mill StopFeatures:Serves as a rigid stop for milling set-ups.  Used with vises, angle plate, jigs, etc Use as a versatile holder, as well as stop           Column:3/4" x6-1/4"            Base:3/4" x2" x4-1/2"            Rod:3/8" x10"  ItemDescriptionABQK-0100Range:3/8"-3/4"

Item0: ABQK-0100
Item: None
Item2: None
Item4: None
Item3: None
Sine Dresser

Sine DresserFeatures:Cross feed up to 50mm Center distance is 50mm within 0.01mm accuracy  Dresses grinding wheel to any angle from 0 to 60 degreeEasy structure and easy operation, the drinding wheel dresser can be adjusted within 0-60°, the tolerance distance between two spindles is ±0.01mm, high accuracy and quality, it can dress any angles of wheel surface by its horizontal and vertical.ItemDescription2310-7000Sine Dresser

Item0: 2310-7000
Item: None
Item2: None
Item4: None
Item3: None
Universal Angle Block Set

Universal Angle Block SetFeatures:Tolerance ±1". Hardness HRC 45-50°. All ground finish. No sice vise,sine plate,angle vise,angle chart or block gage needed. Vee Block dimensions:3"long,1-3/16" wide ,1-3x16"highAngle plate dimensions:2-3/4"long,1-3/16"wide 5/64" high at the narrow end.Set Includes:  V-Block 10°,15°,30°.  Angle Plate 1°, 2°,3°,4°,5°.ItemDescriptionEG02-0224UNIVERSAL ANGLE BLOCK SET

Item0: EG02-0224
Item: None
Item2: None
Item4: None
Item3: None
Quick Change Tool Post

Quick Change Tool PostFeatures:Both are precision engineered to assure repetitive accuracy.Advanced design provides built-in quick tool changing versatility with positive rigidity to meet the most exacting tolerances.Quickly and easily installed on an engine,bench, or turret lathe for a wide range of operations, from fine precision work for heavy duty cutting.Piston type posts are economical,while the wedge type posts are clearly ultra-precise. both accept the toolholders and interchange with aloes, durian,and DTM tooling.ItemDescription0250-0111Model:AXA,Wedge Style   A:2-1/2",B:3-7/8",C:2-1/4",D:9/16",E:1-3/8",H:4-11/16",R:5-3/4",Swing:6-12"0250-0222Model:BXA,Wedge Style   A:3",B:4-5/8",C:2-3/4",D:5/8",E:1-9/16",H:5-9/16"   ,R:7-5/16",Swing:10-15"0250-0333Model:CXA,Wedge Style   A:3-1/2",B:5-1/8",C:3",D:3/4",E:1-29/32",H:6-1/8",R:7-7/8",Swing:13-18"0250-0444Model:CA,Wedge Style   A:4",B:6-1/4",C:3-5/8",D:7/8",E:2-1/8",H:7",R:9",Swing:14-20"0250-0100Model:AXA,Piston Style   A:2-1/2",B:3-7/8",C:2-1/4",D:9/16",E:1-7/16",H:4-11/16",R:5-3/4",Swing:6-12"0250-0200Model:BXA,Piston Style   A:3",B:4-5/8"C:2-3/4"D:5/8",E:1-5/8"   ,H:5-9/16",R:7-5/16",Swing:10-15"0250-0300Model:CXA,Piston Style   A:3-3/8",B:5-1/8"C:3"D:3/4",E:1-7/8"x6-1/8"x7-7/8"x13-18"0250-0400Model:CA,Piston Style   A:4",B:6-1/4"C:3-5/8"D:7/8",E:2-1/8"x7"x9"x14-20"

Item0: 0250-0111
Item: 0250-0333
Item2: 0250-0200
Item4: 0250-0300
Item3: 0250-0400
Horizontal/Vertical Precision Rotary Table

Horizontal/Vertical Precision Rotary TableFeatures:1/2" T slot6 " table has a MT2 center hole 8" Table has a MT3 center hole The table is graduated a full 360 degrees ItemDescription5817-40044"5817-40066"5817-40088"

Item0: 5817-4004
Item: 5817-4006
Item2: 5817-4008
Item4: None
Item3: None
Product
info@zzwtools.com

ZZW PRECISION TOOL SUPPLY (SHANGHAI)CO.,LTD

Add: #4F, No.6 Building, #528 RuiQing Rd., East ZhangJiang, 

PuDong 201201, Shanghai,P.R.China  





Moblin Link