HSS Hex Shank Spiral Flute Aligning ReamersFeatures:Short lengths permits use in limited access areas for portable pneumatic toolsEach reamer shank matches socket size for the bolt which will be driven through the newly reamer hole.ItemDescription0523-602511/16"x 6-1/2"x 4-1/2"x 1-1/16"0523-603513/16"x 7"x 5"x 1-1/4"0523-604515/16"x 7"x 5"x 1-7/16"0523-60551-1/16"x 7"x 5"x 1-5/8"

HSS Aligning Reamers, Spiral Flute, Witj 3/4" Weldon ShankFeatures:HSS reamer has a specially designed cutting geometry that is designed to allow this aligning reamer to be used in a magnetic drill which has ¾” Weldon shank.The unique multi-flute design for a fast smoother cut and better finishing.ItemDescription0521-0916Size: 9/16",F.L.: 4",O.L.: 5-1/2"0521-1116Size: 11/16",F.L.: 4-1/2",O.L.: 6-1/2"0521-0034Size: 3/4",F.L.: 5",O.L.: 7"0521-1316Size: 13/16",F.L.: 5",O.L.: 7"0521-1516Size:15/16",F.L.: 5",O.L.: 7"0521-0001Size: 1",F.L.: 5",O.L.: 7"0521-1716Size: 1-1/16",F.L.: 5",O.L.: 7"0521-1316Size: 1-3/16",F.L.: 5",O.L.: 7"0521-0114Size: 1-1/4",F.L.: 5",O.L.: 7"

HSS Aligning Reamers 1/2" Straight Shank Wtih 3-Equal Flat, Spiral FluteFeatures:5 FluteLeft-Hand Spiral with Right-Hand CutHSS reamer to align existing hole prior to rivet or bolt installation.The point is tapered to allow entry into overlapping holes.ItemDescription0522-00383/8"x 3/8"x 1-1/2"x 2-3/4"x 4-5/8"0522-00121/2"x 1/2"x 1-1/2"x 4"x 5-7/8"0522-00585/8"x 1/2"x 1-1/2"x 4-1/2"x 6-3/8"0522-111611/16"x 1/2"x 1-1/2"x 4-1/2"x 6-3/8"0522-00343/4"x 1/2"x 1-1/2"x 5"x 6-7/8"0522-131613/16"x 1/2"x 1-1/2"x 5"x 6-7/8"0522-00787/8"x 1/2"x 1-1/2"x 5"x 6-7/8"0522-151615/16"x 1/2"x 1-1/2"x 5"x 6-7/8"0522-00011"x 1/2"x 1-1/2"x 5"x 6-7/8"0522-17161-1/16"x 1/2"x 1-1/2"x 5"x 6-7/8"

Ansi H.S.S. Reamer Straight Shank, Straight Flute, Right Hand CutDiameter Tolerance:Thru 1/4" diameter       +0.0001" to +0.0004"                                     -0.0000"Above 1/4" to 1"           +0.0001" to +0.0005"                                     -0.0000"Above 1" to 1-1/2"        +0.0002" to +0.0006"                                      -0.0000"Features:Standard 45º chambered cutting edge.Straight flute design.Bright finished.ItemDescriptionMetric-0400-50808.0mm0400-515015.0mm0400-516016.0mm0400-518018.0mm0400-520020.0mmInch-5015-00451/4"5015-02457/8"5015-02851"5015-03051-1/8"5015-03201-1/4"5015-03301-3/8"5015-03401-1/2"

Hss Solid Capscrew Counterbore Sets, 7Pcs 3 Flute, Straight ShankItemDescription508S-0007Inch Size:   (6#,8#,10#,1/4",5/16",3/8",1/2")508S-007MMetric Size: (M3,M4,M5,M6,M8,M10,M12)

Ansi Hss Chucking  Reamer SetFeatures:H.S.S.Straight shank, ANSI StandardStraight flute, right-hand cutTolerance: +0.0002" – 0.0000"29 ps set: 1/16" thru 1/2" by 64ths, fractional size26 ps set: Letter size from A to Z14 ps set: Over & under size 0.124" thru. 0.5010", decimal size25 ps set: 1.0 mm to 13.00 mm by 0.5 mm60 ps set: #1 to #60 ItemDescription5500-SF001/16" thru. 1/2" by   64ths,29ps/set5500-SL00Letter size from A to Z;26ps/set5500-SX00Over & under size   0.124"thru0.5010" 14ps/set5500-SB001.0mm-13.0mm by 0.5mm5500-SK00#1 - #605500-SE001/16" - 1/14"

Ansi Hss Chucking Reamer SetFeatures:H.S.S.Straight shank, ANSI StandardStraight flute, right-hand cutTolerance: +0.0002" – 0.0000"29 ps set: 1/16" thru 1/2" by 64ths, fractional size26 ps set: Letter size from A to Z14 ps set: Over & under size 0.124" thru. 0.5010", decimal size25 ps set: 1.0 mm to 13.00 mm by 0.5 mm60 ps set: #1 to #60 ItemDescription5500-SF001/16" thru. 1/2" by   64ths,29ps/set5500-SL00Letter size from A to Z;26ps/set5500-SX00Over & under size   0.124"thru0.5010" 14ps/set5500-SB001.0mm-13.0mm by 0.5mm5500-SK00#1 - #605500-SE001/16" - 1/14"