SRDCN Indexable Tool Holder

SRDCN Indexable Tool HolderFeatures:0-Degree lead angle 7º Relief use RCMT insertCARBIDE INSERT, TiN COATEDItemDescription2523-1000RCMT2202523-1010RCMT320ItemModelShank Square(A/B)Oal(C)FInsertInsertScrew2376-0006SRDCN06-2J3/8"3-1/2"3/16"RCMT22M2.5 x 82376-0012SRDCN12-3B3/4"4-1/2"3/8"RCMT32M3.5 x 10

Item10: 2523-1000
Item9: 2523-1010
Item8: 2376-0006
Item7: 2376-0012
Item6: None
Item5: None
Item0: None
Item: None
Item2: None
Item4: None
Item3: None
SCLC R/L Tool Holder For CCMT Insert

SCLC R/L Tool Holder For CCMT InsertFeatures:● Negative 5º ends or side cutting edge angle for    positive 80º diamond CCMT CCGX insertsCARBIDE INSERT CVD COATED, BPS101ItemDescription2200-1008CCMT21.512200-1014CCMT32.512200-1016CCMT32.52Right Hand ItemLeft Hand ItemModelShank Square(A/B)Oal(C)FInsertInsertScrew2370-50042370-6004SCLC R/L-06-2J3/8"3-1/2"1/2"CCMT21.5M2.5 x 82370-50062370-6006SCLC R/L-08-3A1/2"4"5/8"CCMT32.5M4 x 102370-50082370-6008SCLC R/L-10-3B5/8"4-1/2"3/4"CCMT32.5M4 x 122370-50102370-6010SCLC R/L-12-3B3/4"4-1/2"1"CCMT32.5M4 x 12

Item10: 2200-1008
Item9: 2200-1014
Item8: 2200-1016
Item7: 2370-5004
Item6: 2370-5006
Item5: 2370-5008
Item0: 2370-5010
Item: 2370-6004
Item2: 2370-6006
Item4: 2370-6008
Item3: 2370-6010
Indexable Face Milling Cutter

Indexable Face Milling Cutter(75 degree, positive rake, oxide finish body)Features:Use standard SPG42 carbide insert   75 degree posive rake   Right hand cut  ItemDescription2509-0010Cutting   Dia.:2-1/2",Bore Dia.:3/4",No. of Inserts:4,Insert:SPG42,Locking   Screw:SM6 x 192509-0012Cutting   Dia.:3",Bore Dia.:1",No. of Inserts:5,Insert:SPG42,Locking   Screw:SM6 x 192509-0014Cutting   Dia.:4",Bore Dia.:1-1/2",No. of Inserts:6,Insert:SPG42,Locking   Screw:SM6 x 192509-0016Cutting   Dia.:5",Bore Dia.:1-1/2",No. of Inserts:6,Insert:SPG42,Locking   Screw:SM6 x 19

Item10: 2509-0010
Item9: 2509-0012
Item8: 2509-0014
Item7: 2509-0016
Item6: None
Item5: None
Item0: None
Item: None
Item2: None
Item4: None
Item3: None
Indexable Face Milling Cutter

Indexable Face Milling Cutter (90 degree, positive rake, oxide finish body)Features:Uses standard TPG32 carbide insert   90 degree posive rake   Right hand cut ItemDescription2508-0012Cutting   Dia.:2",Bore Dia.:3/4",No. of Inserts:3,Insert:TPG32,Locking   Screw:SM6 x 122508-0016Cutting   Dia.:2-1/2",Bore Dia.:3/4",No. of Inserts:4,Insert:TPG32,Locking   Screw:SM6 x 122508-0018Cutting   Dia.:3",Bore Dia.:1",No. of Inserts:5,Insert:TPG32,Locking   Screw:SM6 x 12

Item10: 2508-0012
Item9: 2508-0016
Item8: 2508-0018
Item7: None
Item6: None
Item5: None
Item0: None
Item: None
Item2: None
Item4: None
Item3: None
Indexable Face Milling Cutter

Indexable Face Milling Cutter(75 degree, positive rake, nickel plated body)Features:● Use standard SPG42 carbide insert● 75 degree positive rake ● Right hand cutItemCutting Dia.Bore Dia.No. of InsertsInsertLockingScrew3509-00102-1/2"3/4"4SPG42SM6 x 193509-00123"1"5SPG42SM6 x 193509-00144"1-1/2"6SPG42SM6 x 193509-00165"1-1/2"6SPG42SM6 x 19LOCKING SCREWItemDescription2995-0051Locking screw SM5x10 for 0046-0912, & 0046-09152995-0068Locking screw SM6x12 for 3508-0012, 3508-0016,3508-0018, 2508-0012, 2508-0016, 2508-0018, 0046-0913, 0046-0914, 0046-0916, & 0046-09172995-0069Locking screw SM6x19 for 3509-0010, 3509-0012,3509-0014, 3509-0016, 2509-0010, 2509-0012,2509-0014, & 2509-0016

Item10: 3509-0010
Item9: 3509-0012
Item8: 3509-0014
Item7: 3509-0016
Item6: 2995-0051
Item5: 2995-0068
Item0: 2995-0069
Item: None
Item2: None
Item4: None
Item3: None
12pcs Un External / Internal Threading Set

12pcs Un External / Internal Threading SetItem #0028-02833/4" shank indexable thread tool set, 12ps UN external thread right handFeatures:● Shank diameter: 3/4". insert inscribed circle 3/8”Set Include:● 7 full profile TiN Coated insert, Grade P25C coated    with 3/8 IC: 1 each of 8, 12, 14, 16, 18, 20,    and 24 TPI range● 3 partial profile TiN Coated insert, Grade P25C coated    with 3/8 IC: 1 each of A60 (16-48 TPI range),    AG60 (8-48 TPI range), G60 (8-14 TPI range)● Insert screw: M3.5x10● Shim: LT16R-3, shim screw: M5x0.5● 1 external toolholder SER 0750 K16 3/4" shank● 1 screw & 1 wrench Item #0028-02843/4" shank indexable thread tool set, 12ps UN internal thread right handFeatures:● Shank diameter: 3/4". insert inscribed circle 3/8”Set Include:● 7 full profile TiN Coated insert, Grade P25C coated    with 3/8 IC: 1 each of 8, 12, 14, 16, 18, 20,    and 24TPI range● 3 partial profile TiN Coated insert, Grade P25C coated    with 3/8 IC: 1 each of A60 (16-48 TPI range),    AG60 (8-48 TPI Range), G60 (8-14 TPI Range)● Insert screw: M3.5x10● 1 Internal toolholder S12P-THSNR16 3/4" shank● 1 screw & 1 wrench ItemDescription0028-028312pc   UN External Threading set, Right Hand Shank Diameter: 3/4", Insert   Inscribed Circle 3/8"0028-028412pc   UN Internal Threading set, Right Hand Shank Diameter: 3/4", Insert   Inscribed Circle 3/8"0028-0287Replacement   inserts 10 ps/set External 1pc each of 8, 12, 14, 16, 18, 20, and 24TPI range   and A-60°, AG-60°, and G-60°0028-0288Replacement   inserts 10 ps/set Internal 1pc each of 8, 12, 14, 16, 18, 20, and 24TPI range   and A-60°, AG-60°, and G-60°

Item10: 0028-0283
Item9: 0028-0284
Item8: 0028-0287
Item7: 0028-0288
Item6: None
Item5: None
Item0: None
Item: None
Item2: None
Item4: None
Item3: None
90 Degree R8 Shank Indexable End Mill

90 Degree R8 Shank Indexable End Mill With APKT1604 Carbide InsertFeatures:Shank size: R8 shank. R8 shank threading: 7/16"-20 Reduces cutting forces Maximum rigidity. Forged steel body. Each cutter is provided with 1 keyand a set of locking screw. APKT1604 carbide inserts are installed already.( Prices including APKT1604 insert).Tool angles: Cutting rake angle: 11° to 13°Radial rake angle: 11° to 13°Axial rake angle: 6° to 10°Setting angle: 90°ItemDescription0028-69031"0028-69041-1/4"0028-69051-1/2"0028-69062"0028-69072-1/2"0028-69083"

Item10: 0028-6903
Item9: 0028-6904
Item8: 0028-6905
Item7: 0028-6906
Item6: 0028-6907
Item5: 0028-6908
Item0: None
Item: None
Item2: None
Item4: None
Item3: None
90 Degree, Indexable Boring Bar Set

90 Degree, Indexable Boring Bar Set Round ShankFeatures:Round shank allows the operator to setpositive or negative rakeChip breaker eliminates long stringer chipsA new cutting edge may be presented bysimply indexing the insertIt is not necessary to remove tool fromchuck or tool postScrew down stylePositive rake 90° leadC6 grade: carbide for steel and alloy steel1/4" I.C. carbide insert fits all barsRadius: 1/64"Key: T8ItemDescriptionREPLACEMENT   CARBIDE INSERTS#2627-91042124-1028Insert:   TCMT21.51, Grade: C6, I.C: 1/4", Radius: 0.015", Coated: TiN Coated2224-0193Insert:   TCMT221, Grade: C6, I.C: 1/4", Radius: 0.015", Coated: CVD Coated2627-3020Shank   Dia: 1/2", Bore Depth: 2-3/4", Min Bore: 7/16"2627-3022Shank   Dia: 1/2", Bore Depth: 3-5/8", Min Bore: 7/16"2627-3024Shank   Dia: 1/2", Bore Depth: 3", Min Bore: 1/2"2627-3026Shank   Dia: 1/2", Bore Depth: 4", Min Bore: 1/2"2627-3028Shank   Dia: 5/8", Bore Depth: 3", Min Bore: 7/16"2627-3030Shank   Dia: 5/8", Bore Depth: 3-7/8", Min Bore: 7/16"2627-3032Shank   Dia: 5/8", Bore Depth: 3-1/4", Min Bore: 1/2"2627-3034Shank   Dia: 5/8", Bore Depth: 4-1/4", Min Bore: 1/2"2627-3036Shank   Dia: 5/8", Bore Depth: 3-1/2", Min Bore: 9/16"2627-3038Shank   Dia: 5/8", Bore Depth: 4-5/8", Min Bore: 9/16"2627-3040Shank   Dia: 3/4", Bore Depth: 3-3/8", Min Bore: 7/16"2627-3042Shank   Dia: 3/4", Bore Depth: 4-1/4", Min Bore: 7/16"2627-3044Shank   Dia: 3/4", Bore Depth: 3-5/8", Min Bore: 1/2"2627-3046Shank   Dia: 3/4", Bore Depth: 4-5/8", Min Bore: 1/2"2627-3048Shank   Dia: 3/4", Bore Depth: 3-7/8", Min Bore: 9/16"2627-3050Shank   Dia: 3/4", Bore Depth: 5", Min Bore: 9/16"2627-3052Shank   Dia: 3/4", Bore Depth: 4-1/4", Min Bore: 11/16"2627-3054Shank   Dia: 3/4", Bore Depth: 5-1/2", Min Bore: 11/16"SET   INCLUDESC6   garde carbide insert, wrench and aluminum box2627-91044pcs/set,   1/2"2627-91066pcs/set,   5/8"2627-91088pcs/set,   3/4"

Item10: 2627-9104
Item9: 2627-9106
Item8: 2627-9108
Item7: None
Item6: None
Item5: None
Item0: None
Item: None
Item2: None
Item4: None
Item3: None
45° Indexable Face Mill

45° Indexable Face Mill For Octagonal Double Side 16 Cutting Edge Insert With ONGX0800608 InsertFeatures:Octagonal double side insert with 16 cutting edges is the most economical insert on the market for face machining applicationNegative radial rake angle and axial rake angle structure combined with thick ONGX insert body improves cutter overall resistance to impact and toughnessUnique insert screw hole design to improve clamping rigidnessInsert available for semi-finishing and roughing applicationSuitable for most face milling applications on steel, stainless steel, and cast ironReduces vibration on long overhang applicationsScrew and wedge insert clamping Depth of cut up to 0.196"ItemDescription3300-16282-1/2"x3/4"x53300-16293"x1"x63300-16304"x1-1/2"x73300-16315"x1-1/2"x83300-16328"x2-1/2"x12

Item10: 3300-1628
Item9: 3300-1629
Item8: 3300-1630
Item7: 3300-1631
Item6: 3300-1632
Item5: None
Item0: None
Item: None
Item2: None
Item4: None
Item3: None
MDJN R/L Toolbolder

MDJN R/L ToolbolderFeatures:3º side cutting edge angleUsed for turning, facing, copying,from roughing to finishing.DNMG insertsCARBIDE INSERT CVD COATED, BPS101ItemDescription2206-1028DNMG432ItemDescription2302-5016right   hand; MDJN R/L-12-3B2302-5020right   hand; MDJN R/L-16-4D2302-6016left   hand ; MDJN R/L-12-3B2302-6020left   hand ; MDJN R/L-16-4D

Item10: 2302-5016
Item9: 2302-5020
Item8: 2302-6016
Item7: 2302-6020
Item6: 2206-1028
Item5: None
Item0: None
Item: None
Item2: None
Item4: None
Item3: None
90° Square Shoulder Indexable End Mill

90° Square Shoulder Indexable End MillFeatures:90°Cutting angle Screw down insert Radial rake angle: -10° All types of square shoulder face milling,side milling and full slot milling (shaft endmills) of steels, alloyed steels, stainlessand heat resistant steels, case irons andaluminum alloys.Fitted with 10° positive rectangular insertallow high depth of cut and feed per toothUses APKT / APHW / APKR_APHT /APMT insert (sold separately)ItemDescription0056-09123/8"0056-09131/2"0056-09141/2"0056-09165/8"0056-09173/4"0056-09201"0056-09211"0056-09221-1/4"0056-09231-1/4"0056-09241-1/2"

Item10: 0056-0912
Item9: 0056-0913
Item8: 0056-0914
Item7: 0056-0916
Item6: 0056-0917
Item5: 0056-0920
Item0: 0056-0921
Item: 0056-0922
Item2: 0056-0923
Item4: 0056-0924
Item3: None
APKT Insert

APKT Insert PVD CoatedCutting AluminumItemDescription0058-1130APKT11T308   LH carbide insert Uncoated, Cutting Aluminum0058-1604APKT160408   LH carbide insert Uncoated, Cutting Aluminum

Item10: None
Item9: None
Item8: None
Item7: None
Item6: None
Item5: None
Item0: 0058-1130
Item: 0058-1604
Item2: None
Item4: None
Item3: None
APKT Insert

APKT InsertCutting SteelItemDescription0056-1130APKT11T3   carbide insert TiN Coated, Cutting Steel0056-1604APKT1604   carbide insert TiN Coated, Cutting Steel

Item10: None
Item9: None
Item8: None
Item7: None
Item6: None
Item5: None
Item0: 0056-1130
Item: 0056-1604
Item2: None
Item4: None
Item3: None
Carbide Indexable End Mill

Carbide Indexable End Mill(R8 Shank Oxide Finish Body) Features:Comes with insert installedUses standard triangular insertPositive rake 90°, right hand cut.R8 Shank Threading: 7/16"-20ItemDescription0046-0915Dia.: 1", No. of Inserts:2, Insert: TPG22, Locking   Screw: SM5 x 100046-0916Dia.: 2", No. of Inserts: 3, Insert: TPG32, Locking   Screw: SM6 x 120046-0917Dia.: 3", No. of Inserts: 5, Insert: TPG32, Locking   Screw: SM6 x 12

Item10: None
Item9: None
Item8: None
Item7: None
Item6: None
Item5: None
Item0: 0046-0915
Item: 0046-0916
Item2: 0046-0917
Item4: None
Item3: None
Coolant-Thru 90° Square Shoulder Indexable Face Mill

Coolant-Thru 90° Square Shoulder Indexable Face Mill(Nickel Plated Body)Features:● Coolant-thru tool● Better surface finish due to increased rigidity● Longer tool life or increased feed rate● Longer insert life ItemDescription5808-00122"5808-00183"5808-00204"5808-00225"

Item10: None
Item9: None
Item8: None
Item7: None
Item6: None
Item5: None
Item0: 5808-0012
Item: 5808-0018
Item2: 5808-0020
Item4: 5808-0022
Item3: None
Product
info@zzwtools.com

ZZW PRECISION TOOL SUPPLY (SHANGHAI)CO.,LTD

Add: #4F, No.6 Building, #528 RuiQing Rd., East ZhangJiang, 

PuDong 201201, Shanghai,P.R.China  





Moblin Link