5C Spin IndexItem # 0225-0204Hardened and precision-ground spindle 0.0004" TIP spindle accuracy Precision-ground 36-position index plate Direct indexing in ten steps,graduated in 5-degree increments For use on all milling machines,surface grinders,and inspection equipment Approximate weight 18 lbs. ItemDescription0225-02045C Spin Index Index0240-0104Tail stock for 5C spin indexitem 0240-0104
CAT50 / SK50 / JT 50 Collet Chuck Tightening Fixture Fit CAT50 Tool HolderFeatures:Applicable model is CAT50 as well as SK50 and JT50 Tool HolderCorrect orientation and non-slip quench hardeningEasy to install, reliable, protect tool holder, could bear greater torque, avoid skiddingThe material is aluminum alloyNovel hollow design, protect the conical surface of the tool holder.Adopt new material, detailed and comprehensive protection.Match for CT50 tool holer type as well as SK50 and JT50When installing the CNC tools on machine tools, some parts such as tools and pull studs need to installed on tool holders. Because of the specific form of the CNC tools, the traditional tool lock seat can’t satisfy the tighten or unscrew requirement during production, assembling and using. There are an upward direction lock snap ring and a downward direction lock snap ring on the dicephalous tool lock base. They can satisfy the installation of CNC pull studs, ER nuts, and Tools, etc. from both directions.ItemDescriptionCT50-7850Applicable model is CAT50 as well as SK50 and JT50 Tool Holder
BT30 Tool Holder Tightening Fixture For Universal CNC Equipment, Double Head Anodized HardenedFeatures:Applicable model is BT30Realize Double-end Mounting, facilitate mount and dismount.The material is aluminum alloy, alloy steel composite.Easy to install, reliable, protect tool holder, could bear greater torque, avoid skiddingSliding block positioning design, correct orientation and non-skid.Adopt new material, detailed and comprehensive protection.Match for BT30 tool holer typeWhen installing the CNC tools on machine tools, some parts such as tools and pull studs need to installed on tool holders. Because of the specific form of the CNC tools, the traditional tool lock seat can’t satisfy the tighten or unscrew requirement during production, assembling and using. There are an upward direction lock snap ring and a downward direction lock snap ring on the dicephalous tool lock base. They can satisfy the installation of CNC pull studs, ER nuts, and Tools, etc. from both directions.ItemDescriptionBT30-8530Match For BT30ToolHoler Type
Mill StopFeatures:Serves as a rigid stop for milling set-ups. Used with vises, angle plate, jigs, etc Use as a versatile holder, as well as stop Column:3/4" x6-1/4" Base:3/4" x2" x4-1/2" Rod:3/8" x10" ItemDescriptionABQK-0100Range:3/8"-3/4"
Universal Angle Block SetFeatures:Tolerance ±1". Hardness HRC 45-50°. All ground finish. No sice vise,sine plate,angle vise,angle chart or block gage needed. Vee Block dimensions:3"long,1-3/16" wide ,1-3x16"highAngle plate dimensions:2-3/4"long,1-3/16"wide 5/64" high at the narrow end.Set Includes: V-Block 10°,15°,30°. Angle Plate 1°, 2°,3°,4°,5°.ItemDescriptionEG02-0224UNIVERSAL ANGLE BLOCK SET
Horizontal/Vertical Precision Rotary TableFeatures:1/2" T slot6 " table has a MT2 center hole 8" Table has a MT3 center hole The table is graduated a full 360 degrees ItemDescription5817-40044"5817-40066"5817-40088"
5C Horizontal/Vertrcal Collet HolderHeight:3-3/4" Base:5" x3-5/8" Universally adaptable to drill presses,milling machines, surface grinders,etc. Collet does not move up or down Retains positive relation to base Can be adjusted or changed without disturbing set-up Can lever opens and closes easily so collets can be changed quickly Utilizes a cam lock and positive release ItemDescription0225-02025C Horizontal/Vertracl Collet Holder
Power FeedFits many popular vertical mills Automatic shut-off at end of cut Feed range: 0-25"/minute. 40" / minute rapid traverse Easy installation 110V with manual reset switch.ItemDescriptionHJ20-0200 Model: X-Axis,Description:Feed 135LbsHJ20-0300Model:X-Axis,Description:Feed 150LbsHJ20-0320Model:Y-Axis,Description:Feed 150LbsHJ20-0325Model:Z-Axis,Description:Feed 150Lbs
Super-Lock Precision CNC Machine Vise Features:Features a thrust bearing that increases are clamping power by 80%Can be mounted upright or sidewaysExcellent to use when you have multiple vise setups ItemDescriptionFA23-5206Width:6", Opening:6", Depth:1-1/2", Oal:15", Clamping Force:10.000lbs, Weight:70lbs
Fine Pole Magnetic ChuckFeautres:Use rare earth ceramic magnets inside for superior holding power Fine poles: 1/8" Poles, 1/16" separators Sealed against dirt and liquid 1-5/8" very low profile to allow max. work height clearance Flat and parallel within 0.0002" Precision ground rails are included ItemDescription2720-5000Size:6" x 12"2720-0000Size:6" x 18"
Precision CNC Milling ViseFeatures:Low profile pull-down jaws.Forged steel body.This design eliminates clamping deflection. It can be opened very wide and provides strong clamping power.Ideal for all types of milling, grinding, drilling and tapping operations on vertical and horizontal CNC machining.HRc 60ºHigh accuracy - all surfaces are hardened and paracision ground square and parelles to an accuracy of 0.0012" jaws and 0.0008" base. ItemDescription1202-1025Width:6", Opening:8", Depth:2", OAL:16.8", Weight:75lbs