58 Pcs Deluxe Steel Slamping Kit, Table Slot 5/8",Stud Size 1/2"-13Features:● Table slot: 5/8"● Stud size: 1/2"-13● Block width: 1"● Quality kit for a bridgeportIncluded:● 24 studs;4 pieces 3", 4", 5", 6", 7", & 8" Long● 4 coupling nuts● 6 flange nuts● 6 T-slot nuts● 6 serrated end clamps● 12 step blocks● Wall HolderItemDescription4230-262658 Pcs Deluxe Steel Slamping Kit, Table Slot 5/8",Stud Size 1/2"-13
5C Hex Collet 7pc SetFeatures:7pcs/set: 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 7/8".Made of high quality spring steelHardened and precision groundCollet end OD & ID threadedAccuracy: 0.0005" TIRItemDescription0223-03097pcs/set: 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 7/8"
Premium Series,BT40,CAT40 ER Floating Tap Collet ChuckFeatures:Ideal for holding taps and reamers forlight duty tapping tasks0.197 compression and 0.315 extensive travelsvia adjustable internal springsUsing standard ER colletAll critical surfaces precision groundMade from alloy steel hardened to 54-56 HRCRear thread for pull stud:CAT40: 5/8 " -11BT40: M16 x 2ItemDescription0537-5983Taper: CAT40, Collet Series: ER16, D: 1.10", L: 3.020", Compression(F1): 0.197", Extension(F2): 0.315"0537-5984Taper: CAT40, Collet Series: ER20, D: 1.34", L: 3.386", Compression(F1): 0.197", Extension(F2): 0.315"0537-5985Taper: CAT40, Collet Series: ER32, D: 1.65", L: 3.543", Compression(F1): 0.197", Extension(F2): 0.315"0537-6566Taper: BT40, Collet Series: ER16, D: 1.10", L: 3.031", Compression(F1): 0.197", Extension(F2): 0.315"0537-6577Taper: BT40, Collet Series: ER32, D: 1.65", L: 3.543", Compression(F1): 0.197", Extension(F2): 0.315"
Premium Series, V-Flange ER Collet Chuck,Balanced to 20,000 RPM at G2.5Features:All ground bodyMade from alloy steel hardened to HRC 52-56Taper accurately ground exceeding AT3 standardFactory balanced to save spindle life, and tool life,and increased productivity.Concentricity less than 0.0002” from taper to collet faceCertification included with each holder, documented TIR,taper accuracy, and balance measurement.Coolant through capacityDraw bar thread CAT-40: 5/8"-11 BT40: M16x2Balanced to 20,000 RPM at G2.5Wrench not includedItemDescription2001-0005Taper: CAT40, Collet Series: ER16, Projection Length: 2.76", Range: 1/32"-3/8"2001-0010Taper: CAT40, Collet Series: ER16, Projection Length: 4", Range: 1/32"-3/8"2001-0025Taper: CAT40, Collet Series: ER20, Projection Length: 2.76", Range: 1/16"-1/2"2001-0030Taper: CAT40, Collet Series: ER20, Projection Length: 4", Range: 1/16"-1/2"2001-0015Taper: CAT40, Collet Series: ER32, Projection Length: 2.76", Range: 3/32"-25/32"2001-0020Taper: CAT40, Collet Series: ER32, Projection Length: 4", Range: 3/32"-25/32"2001-0035Taper: CAT40, Collet Series: ER40, Projection Length: 2.76", Range: 1/8"-1"2001-0040Taper: CAT40, Collet Series: ER40, Projection Length: 4", Range: 1/8"-1"3001-0020Taper: BT40, Collet Series: ER32, Projection Length: 4", Range: 3/32"-25/32"
One Pair Magnetic Chuck Parallels 2ps/PairApplications:● "V" blocks are universal (hold in any direction on a magnetic chuck).Features:● Cast integrally with aluminum to ensure the blocks will never crack or become loose even when accidentally dropped.● Steel used is selected for the highest magnetic transfer and low retention of magnctic flux.Includes:Model # 1●1"x2"x4" micro parallels ground all overand serial numbered in pairs.ItemDescriptionEG06-2001One Pair Magnetic Chuck Parallels
Universal "V" BlockFeatures:● Cast integrally with aluminum to ensure the blocks will never crack or become loose even when accidentally dropped.● Steel used is selected for the highest mangnetic transfer and low retention of magnctic flux.● "V" blocks are universal (hold in any direction on a magnetic chuck).● Two V's: 1-7/8"x2-3/8"x2".● Large V: 2" round capacity.● Small V: 1/2" round capacity.ItemDescriptionEG06-2004Universal "V" block
Precision Angle PlateFeatures:Solid one-piece steel construction Hardened to Rc58-62 Ground flat, square and parallel to 0.0002" ItemDescription2200-0901Size:4"x3"x3"; Thick: 1"; Number of holes: 13Tapped 1/4"-202200-0903Size:4"x4"x4"; Thick: 1-1/4"; Number of holes: 13Tapped 1/4"-202200-0904Size:6"x6"x4"; Thick: 1-1/4"; Number of holes: 26Tapped 1/4"-20
DemagnetizerFeatures:115V AC with ON/OFF switchTable size: 8.27 x 5.98 x 4.13"Demagnetize dies, punches, cuttersor any tools that have become magnetizedItemDescriptionP900-S3158.27 x 5.98 x 4.13"
Circul Permanent Magnetic ChuckFeatures:The round fine pitch permanent magnet chuck is suitable for grinder and lathe, best for longer and thicker workpieceThe round micro pitch permanent magnetic chuck is suitable for grinding application, best for smaller and thinner workpiece.High holding power: max 140lbs/sq.in.Steel pole spacing: 1/16", brass pole spacing: 1/32"ItemDescription1151-1150D:7.874",H:2.008",K:0.079",C:6.299",E:7.087",Z-M:4xM8,Weight:10kg1151-2200D:6.299",H:1.929",K:0.079",C:4.921",E:5.512",Z-M:4xM8,Weight:6.5kg
ER 32 Collet ChuckFeatures:Compatible with: CNC Milling Lathe Tool Engraving MachineMount to your choice of backplate to use on a lathe.Can also be used as a fixture on a milling table.ER wrench includedItemDescriptionER32-0080D1:3.149",D:2.165",L:1.653",d:1.259"ER32-0100D1:3.937",D:2.834",L:1.653",d:1.259"
Hex ER-32 Collet BlockFeatures:Use standard ER collets for fast set-ups on CNC machinesFor parallel, square or hex shapes as well as for cross-hole drilling at 60, 90 or 120 degreesMade of Alloy tool steel hardened and ground to 0.0005" flatness, sureness and parallelismMay be used standing uprightBlock dimensions are approximately 1-3/4" x 1-3/4" x 2-3/4" long.15/16" through hole allows for long parts to be machined.ER wrench included.ItemDescription6920-32061-3/4" x 1-3/4" x 2-3/4"
Square ER-32 Collet BlockFeatures:Use standard ER collets for fast set-ups on CNC machinesFor parallel, square or hex shapes as well as for cross-hole drilling at 60, 90 or 120 degreesMade of Alloy tool steel hardened and ground to 0.0005" flatness, sureness and parallelismMay be used standing uprightBlock dimensions are approximately 1-3/4" x 1-3/4" x 2-3/4" long.15/16" through hole allows for long parts to be machined.ER wrench included.ItemDescription6920-32041-3/4" x 1-3/4" x 2-3/4"
CAT50 / SK50 / JT 50 Collet Chuck Tightening Fixture Fit CAT50 Tool HolderFeatures:Applicable model is CAT50 as well as SK50 and JT50 Tool HolderCorrect orientation and non-slip quench hardeningEasy to install, reliable, protect tool holder, could bear greater torque, avoid skiddingThe material is aluminum alloyNovel hollow design, protect the conical surface of the tool holder.Adopt new material, detailed and comprehensive protection.Match for CT50 tool holer type as well as SK50 and JT50When installing the CNC tools on machine tools, some parts such as tools and pull studs need to installed on tool holders. Because of the specific form of the CNC tools, the traditional tool lock seat can’t satisfy the tighten or unscrew requirement during production, assembling and using. There are an upward direction lock snap ring and a downward direction lock snap ring on the dicephalous tool lock base. They can satisfy the installation of CNC pull studs, ER nuts, and Tools, etc. from both directions.ItemDescriptionCT50-7850Applicable model is CAT50 as well as SK50 and JT50 Tool Holder
BT30 Tool Holder Tightening Fixture For Universal CNC Equipment, Double Head Anodized HardenedFeatures:Applicable model is BT30Realize Double-end Mounting, facilitate mount and dismount.The material is aluminum alloy, alloy steel composite.Easy to install, reliable, protect tool holder, could bear greater torque, avoid skiddingSliding block positioning design, correct orientation and non-skid.Adopt new material, detailed and comprehensive protection.Match for BT30 tool holer typeWhen installing the CNC tools on machine tools, some parts such as tools and pull studs need to installed on tool holders. Because of the specific form of the CNC tools, the traditional tool lock seat can’t satisfy the tighten or unscrew requirement during production, assembling and using. There are an upward direction lock snap ring and a downward direction lock snap ring on the dicephalous tool lock base. They can satisfy the installation of CNC pull studs, ER nuts, and Tools, etc. from both directions.ItemDescriptionBT30-8530Match For BT30ToolHoler Type