#40 & #50 Taper Caterpillar V-Flange Jacobs Taper Holder

#40 & #50 Taper Caterpillar V-Flange Jacobs Taper HolderFeatures:Meets or exceeds ANSI specifications.Constructed of alloy steel.Hardened to HRC 52-56 for long service life.Shot peened finish.Jacobs taper T.I.R. <0.0002". Draw bar thread: CAT40 5/8"-11.                             CAT50 1"-8.ItemDescriptionCAT40CAT406781-5481Jacobs   Taper:JT2; Projection Length:1.50"6781-5482Jacobs   Taper:JT3; Projection Length:1.50"6781-5484Jacobs   Taper:JT6; Projection Length:1.50"6781-5485Jacobs   Taper:JT33; Projection Length:1.50"CAT50CAT506781-5487Jacobs   Taper:JT2; Projection Length:1.50"6781-5488Jacobs   Taper:JT3; Projection Length:1.50"6781-5490Jacobs   Taper:JT6; Projection Length:1.50"6781-5491Jacobs   Taper:JT33; Projection Length:1.50"

Item: 6781-5491
Item2: None
Item4: None
Item3: None
Item0: 6781-5490
Item5: 6781-5488
Item6: 6781-5487
Item7: 6781-5485
Item8: 6781-5484
Item9: 6781-5482
Item10: 6781-5481
SRDCN Indexable Turning Toolholders

Item: 3056-0004
Item2: 3056-0006
Item4: 3056-0008
Item3: 3056-0010
Item0: 3056-2004
Item5: 3056-2006
Item6: 3056-2008
Item7: 3056-2010
Item8: 3056-2012
Item9: None
Item10: None
3pc Precision Tool Set

Item: 1190-1003
Item2: None
Item4: None
Item3: None
Item0: None
Item5: None
Item6: None
Item7: None
Item8: None
Item9: None
Item10: None
CNC Integral Keyless Chuck

CNC Integral Keyless ChuckFeatures:High precision keyless chuck-arbor is integrated for a single piece construction. Single piece construction provides for increased accuracy and greater rigidity. Balanced design. Increased holding power when tightened by wrench,preventing tool slippage. Easy to use. Safer than separate shank models Wrench supplied.ItemDescription0222-0890Capacity:   0-1/2", Taper: CT40, Weight: 3.5lbs0222-0892Capacity:  0-5/8", Taper: CT40, Weight: 4.3lbs0222-0894Capacity:   0-1/2", Taper: CT50, Weight: 9.2lbs0222-0896Capacity:   0-5/8", Taper: CT50, Weight: 9.9lbs0222-0990Capacity:   0-1/2", Taper: BT40, Weight: 4.0lbs

Item: None
Item2: None
Item4: None
Item3: None
Item0: None
Item5: None
Item6: 0222-0990
Item7: 0222-0896
Item8: 0222-0894
Item9: 0222-0892
Item10: 0222-0890
ER-16 Collet Set & Chuck

ER-16 Collet Set & ChuckFeatures:10pcs ER16 chucks set includes the following collet size: 1/32", 1/16", 3/32", 1/8", 3/16", 7/32", 1/4", 5/16", 11/32", & 3/8" All collets are made of high quality alloy spring steel. 0.0005" accuracy 1pc spanner + 1pc clamping nut 1pc chuck holder Draw bar thread CAT40: 5/8"-113/4 straight shank: 3/8"-16Fitted plastic caseItemDescriptionCT40-ER16CAT40-ER16-2.75"0223-0307ER16-3/4"   x 4"

Item: None
Item2: None
Item4: None
Item3: None
Item0: None
Item5: None
Item6: None
Item7: None
Item8: None
Item9: 0223-0307
Item10: CT40-ER16
MT3 Shank ER32 Chuck With 11pc Collets Set

MT3 Shank ER32 Chuck With 11pc Collets SetFeatures:11pc ER32 collet set : 1/8" - 3/4" by 16th (1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4")All collets are made of high quality alloy spring steel. 0.0005" accuracyHardened and precision ground1pc MT3 shank ER32 collet chuck. Draw bar threads 1/2" x 131pc ER32 spannerFitted plastic caseItemDescription0223-030411pc   ER32 collet set : 1/8" - 3/4" by 16th, 1pc MT3 shank ER32 collet   chuck, 1pc ER32 spanner

Item: None
Item2: None
Item4: None
Item3: None
Item0: None
Item5: None
Item6: None
Item7: None
Item8: None
Item9: None
Item10: 0223-0304
Fully Machined Lthe Chuck Back Plate D1 Type Adaptor

Fully Machined Lthe Chuck Back Plate D1 Type Adaptor For Most 4 Jaw Independent ChuckFeatures:Need machining the back plate shoulders based on different 4 jaw independent chucksThe back plate outside diameter is smaller than the lathe chuck diameter due to the mounting holes are towards the center of the lathe chuck, then the recess diameter D2 of the lathe chuck still provide a tight fit.ItemDescription2600-0162Spindle   Taper:D1-3, Chuck Diameter:6" D=6.29"2600-0163Spindle   Taper:D1-4, Chuck Diameter:6" D=6.29"2600-0164Spindle   Taper:D1-5, Chuck Diameter:6" D=6.29"2600-0165Spindle   Taper:D1-3, Chuck Diameter:8" D=6.29"2600-0166Spindle   Taper:D1-4, Chuck Diameter:8" D=6.29"2600-0167Spindle   Taper:D1-6, Chuck Diameter:8" D=6.29"2600-0168Spindle   Taper:D1-6, Chuck Diameter:10" D=7.87"2600-0169Spindle   Taper:D1-8, Chuck Diameter:10" D=9.05"

Item: 2600-0169
Item2: None
Item4: None
Item3: None
Item0: 2600-0168
Item5: 2600-0167
Item6: 2600-0166
Item7: 2600-0165
Item8: 2600-0164
Item9: 2600-0163
Item10: 2600-0162
Two-Piece Reversible Jaws 3-Jaw Self-Centring Chuck Direct Mount

Two-Piece Reversible Jaws 3-Jaw Self-Centring Chuck Direct Mount" D1"  Series (Direct Mounting) Chuck.  Features:Hardened and ground two-piece reversible jaws  Semi-steel body  Complete with chuck key  Standard accuracy  Standard scroll ItemDescription0559-0101Diameter:6"/160mm0559-0102Diameter:8"/200mm0559-0104Diameter:8"/200mm0559-0106Diameter:10"/250mm0559-0108Diameter:12"/320mm

Item: None
Item2: None
Item4: None
Item3: None
Item0: None
Item5: None
Item6: 0559-0108
Item7: 0559-0106
Item8: 0559-0104
Item9: 0559-0102
Item10: 0559-0101
10 ps/Box Replacement Screw

10 ps/Box Replacement ScrewM4 X 8 Replacement Screws for:90° SQUARE SHOULDER INDEXABLE FACE MILL: 4508-0012 / 0016 / 0018 / 0020 / 0022 / 0024 / 0026INDEXABLE WELDON SHANK END MILL: 5508-0001 / 0002 / 0003 / 0004 / 0005 / 0006 / 0007 / 0008 /0009M2.5 X 6 Replacement Screws for:90° SQUARE SHOULDER INDEXABLE END MILL: 0056-0912/ 0913 / 0914 /0916/ 0917 / 0920 / 0923 / ItemDescription0046-0910M2.5 x   60046-0911M4 x 8

Item: None
Item2: None
Item4: None
Item3: None
Item0: None
Item5: None
Item6: None
Item7: None
Item8: None
Item9: 0046-0911
Item10: 0046-0910
6"X6" Magnetic Sine Plate

6"X6" Magnetic Sine PlateCenter Distance of Rolls 5", within 0.0002"Features:Using high quality materials, strong suction, small remanent magnetization,the magnetic distributionProcess through special processing, make the adjustment of the precisionis higher.Flat type for wide range of uses.Ideal for high accuracy grinding operationsSealed against dirt and liquids.A removable handle and two precision ground rails are included for themagnetic chuckSteel pole spacing: 1/16", brass pole spacing: 1/32"Center distance of rolls 5", within 0.0002"High holding power: max 140lbs/sq.in.ItemDescription2520-10006"x6"

Item: None
Item2: None
Item4: None
Item3: None
Item0: None
Item5: None
Item6: None
Item7: None
Item8: None
Item9: None
Item10: 2520-1000
Caterpillar V-Flange Shell End Mill Holder

Item: 4020-3220
Item2: 4020-3222
Item4: 4020-3224
Item3: 4020-3226
Item0: 4020-3228
Item5: 4020-3230
Item6: 4020-3232
Item7: 4020-3234
Item8: 4020-3236
Item9: 4020-3238
Item10: None
ONHU Carbide Milling Inserts

Item: 3904-1008
Item2: 3904-1208
Item4: None
Item3: None
Item0: 3904-1308
Item5: None
Item6: None
Item7: None
Item8: None
Item9: None
Item10: None
45° Indexable Face Mill,with ONHU 16 Cutting Edge Insert

REPLACEMENT INSERTS: http://www.zzwtools.com/product/4343974/

Item: 3225-0001
Item2: 3225-0002
Item4: 3225-0003
Item3: 3225-0004
Item0: 3225-0005
Item5: 3225-0006
Item6: 3225-0007
Item7: None
Item8: None
Item9: None
Item10: None
HR 150A 3R Type Rockwell Type Hardness Tester

HR 150A 3R Type Rockwell Type Hardness TesterFeatures:●Designed for measuring hardness of metals and alloys of all kinds, hard or soft whether flat, round or irregular in shape.●Simple in design and easy to operate, yet sensitive and accurate testing results can be obtained with these testers.●The are ideally suitable for schools, laboratories, tool rooms, inspection and heat treatment departments & factories.●Conform to IS: 3804-1966 and BS: 891-1962 part I and part II for Rockwell test.Include:(1)5-3/4" testing table.(1)2-3/16" testing table.(1)2-3/16" testing table with "V" grooves.(1)120° diamond penetrator.(1)1/16" steel ball penetrator.(1)Rockwell A test block.(1)Rockwell B test block.(3)Rockwell C test block.(1)Screwdriver.Complete instruction manual.Dustproof plastic covers.LOADS AND INDICATORS:  ●MAXIMUM LOAD(KGF)               150 kg.               ●LOAD RANGE(KGF)                    60, 100, AND 150 kg.●INITIAL LOAD RANGE               10 kg.●MAXIMUM TEST HEIGHT            6”●DEPTH OF THROAT                    5-1/4"●MAX DEPTH OF SPINDLE           2"                     BELOW BASE                                            ●BASE SIZE                                7" X 18"●MACHINE HEIGHT                     24.5"●APPROXIMATE NET WEIGHT      200 lbs.ItemDescriptionRT90-0330HR   150A 3R Type Rockwell Type Hardness Tester

Item: None
Item2: None
Item4: None
Item3: None
Item0: None
Item5: None
Item6: None
Item7: None
Item8: None
Item9: None
Item10: RT90-0330
Dimond Indenter For Rockwell Hardness Tester Diamond 120°

Dimond Indenter For Rockwell Hardness Tester Diamond 120°Features:● Rockwell hardness tester diamond 120°● Cone angle: (a) diamond 120°● R: 0.2mm● The shank diameter is 1/4" (6.35mm )x 7/16" long.● Total Length 1-3/32"=28mm● Length include the steps is 43/64"(17mm),  shank= 25/64" (10mm)● Exact and precise readings● Unmatched quality● Provides micro finish● Free from errors● High on performance● Long working life● Ensures reliable performance● C scale measureItemDescription0090-2000Dimond Indenter For Rockwell Hardness Tester Diamond   120°

Item: None
Item2: None
Item4: None
Item3: None
Item0: None
Item5: None
Item6: None
Item7: None
Item8: None
Item9: None
Item10: 0090-2000
Product
info@zzwtools.com

ZZW PRECISION TOOL SUPPLY (SHANGHAI)CO.,LTD

Add: #4F, No.6 Building, #528 RuiQing Rd., East ZhangJiang, 

PuDong 201201, Shanghai,P.R.China  





Moblin Link