Mill StopFeatures:Serves as a rigid stop for milling set-ups. Used with vises, angle plate, jigs, etc Use as a versatile holder, as well as stop Column:3/4" x6-1/4" Base:3/4" x2" x4-1/2" Rod:3/8" x10" ItemDescriptionABQK-0100Range:3/8"-3/4"
D60 Digital ReadoutFeatures:● Voltage range: AC 80V-260V/50HZ-60HZ● Power dissipation: 20VA● Coordinate number: 1/2/3● Display: 7 bit display with signed● Times frequency: 4X● Readout box input signal: TTL, ELA-422-A● Input frequency: >100KHZ● Resolution: 10μm, 5μm, 1μm, 0.5μm, & 0.1μm● Operating keyboard: light touch buttons● Linear scale grating space: 0.04mm, 0.02mm, 0.01mm, power supply is +5V. the difference between two and four TTL output signal is 90°ItemDescriptionSDS6-2VDescription:2 Axis Digital Scale Display
REPLACEMENT INSERTS : http://www.zzwtools.com/product/4042361/
REPLACEMENT INSERTS : http://www.zzwtools.com/product/4042361/
3" Dia. 7 Flute, 90° Square Shoulder Indexable Face Mill With 7Pcs APKT1604 Inserts With Caterpillar V-Flange CAT-40 Face Mill HolderFeatures:● All "V" flange tooling are interchangeable with brown & sharp, burgmaster, carboloy, cincinnati milacron, de vlieg, erickson, excelled, mooggy, print & whiney, universal, valence, white sand strand and other machining centers.● Shank: CAT40 x 1" - 2-1/16"● Draw bar thread: 5/8"-11● 6780-7104 as Page 24, 50Features:● Cutting diameter: 3"● 90° cutting angle● Screw down insert● Radial rake angle: -10°● Axial rake angle: +7°● All types of square shoulder face milling, side milling and full slot milling (shaft end mills) of steels, alloyed steels, stainless and heat resistant steels, case irons and aluminum alloys.● 4508-0018 as Page 63ItemDescription7104-4518Shank: CAT40 x 1" - 2-1/16"; Cutting diameter: 3"
Sine DresserFeatures:Cross feed up to 50mm Center distance is 50mm within 0.01mm accuracy Dresses grinding wheel to any angle from 0 to 60 degreeEasy structure and easy operation, the drinding wheel dresser can be adjusted within 0-60°, the tolerance distance between two spindles is ±0.01mm, high accuracy and quality, it can dress any angles of wheel surface by its horizontal and vertical.ItemDescription2310-7000Sine Dresser
4-Axis DRO Milling Machine On Quill PackageFeatures:● Voltage 90V-240V● Power DC 5V (15%) 80 MA● Two mounting brackets are located at each end of the scale● Resolution selection: 0.0002"/0.005mm● Zero setting● Half calculating,locating workpiece center● Inch/mm conversion and INC/ABS conversion● Diameter/radius selection● Simple & smooth “R” function● Divide the perimeter of circle # (Bolt Circle Drilling)● Hole drilling along an oblique line● Save 200 work piece zero points● Angular surface processing● Progressive processing of rectangular inner chamber● To reach objective values stop● Cone measure● Number percolate● Takes 16 bits & 32 bits CPU technology● 200 cutlery memory● Power failure memory● DC10-F series small size encoderIncludes:● All mounting hardware● 3 Linear glass scales● I standard DRO Counter● Operating manual● 1pc D80-4V 4-Axis DRO counter● 4pcs glass scales(0.005mm)ItemDescription4028-1632Mill Size:10 x 42",Travel:16 x32x16x6",Overall Length of Scale:21x37x21x10.6"4028-1636Mill Size:10 x 54",Travel:16x36x16x6",Overall Length of Scale:21x41x21x10.6"4028-1640Mill Size:-,Travel:16x40x16x6",Overall Length of Scale:21x45x21x10.6"
3-Axis DRO Milling Machine On Knee PackageFeatures:● Voltage 90V-240V● Power DC 5V (15%) 80 MA● Two mounting brackets are located at each end of the scale● Resolution selection: 0.0002"/0.005mm● Zero setting● Half calculating,locating workpiece center● Inch/mm conversion and INC/ABS conversion● Diameter/radius selection● Simple & smooth “R” function● Divide the perimeter of circle # (Bolt Circle Drilling)● Hole drilling along an oblique line● Save 200 work piece zero points● Angular surface processing● Progressive processing of rectangular inner chamber● To reach objective values stop● Cone measure● Number percolate● Takes 16 bits & 32 bits CPU technology● 200 cutlery memory● Power failure memory● DC10-F series small size encoderIncludes:● All mounting hardware● 3 Linear glass scales● I standard DRO Counter● Operating manual● 1pc D80-3V 3-Axis DRO counter● 3pcs glass scales(0.005mm)ItemDescription3028-1230Mill Size:9 x 40",Travel:12 x30x16",Overall Length of Scale:17x35x21"3028-1232Mill Size:9 x 42",Travel:12x32x16",Overall Length of Scale:17x37x21"3028-1236Mill Size:9 x 49",Travel:12x36x16",Overall Length of Scale:17x41x21"3028-1240Mill Size:-,Travel:12x40x16",Overall Length of Scale:17x45x21"3028-1632Mill Size:10 x 42",Travel:16x32x16",Overall Length of Scale:21x37x21"3028-1636Mill Size:10 x 54",Travel:16x36x16",Overall Length of Scale:21x41x21"
D80 Digital Readout Features:● 7" true color LCD screen, easy to recognizing● Saving the drawing function, the DRO allows to save the drawings into the system which makes the machining to be much more convenient● Special previewing the drawing function, after setting well the parameters, the DRO will display the machined well effect which makes the operating be more visual● Displaying the tool's current position function, during the machining, the system will display the tool's current position according to the drawing which makes the machining be much easier● Help function, during the machining, if there is any doubt, pressing the help button will help you to solve● Custom settings for the shortcut keys, operator can set the shortcut keys according to his operating habit ItemDescriptionD80-3VDescription:3 Axis Digital Readout,with 7" true color LCD ScreenD80-4VDescription:4 Axis Digital Readout,with 7" true color LCD Screen
Replacement inserts : http://www.zzwtools.com/product/4688589/
Magnetic Base and Dial Indicator Combo Features:• Includes 1" indicator and mag base,plus rods, swivel clamp and case• The 2-1/4"diameter 0.001" indicator features:satin chrome finish,tolerance hands,lug back and revolution counter• The 6" high mag base features a 1.5" x 1.5" x 1.75" 50 lb. pull base and a 4.5" long sidearm.All exposed metal is finished in anodized black for corrosion resistance.• Includes blue plastic blow mold case.
ISO40 Holder For ER40 Collet, With Thread 5/8"-11, Length:100mmItemDescription0536-0004ISO40 holder for ER40 collet, with thread 5/8"-11,length:100mm
1/4" Right Angle Die Grinder With Soft GripFeatures:Light weight aluminum housing with soft gripSafety trigger prevents accidental startAngle head provides easy access into tight spaceAlso available for 1/8"(3mm) collet (optional)Use with a variety of accessories for grinding, edge-breaking,deburring and polishingRear exhaustItemDescriptionAT07-03481/4" Right Angle Die