Premium Series, V-Flange ER Collet Chuck,Balanced to 20,000 RPM at G2.5Features:All ground bodyMade from alloy steel hardened to HRC 52-56Taper accurately ground exceeding AT3 standardFactory balanced to save spindle life, and tool life,and increased productivity.Concentricity less than 0.0002” from taper to collet faceCertification included with each holder, documented TIR,taper accuracy, and balance measurement.Coolant through capacityDraw bar thread CAT-40: 5/8"-11 BT40: M16x2Balanced to 20,000 RPM at G2.5Wrench not includedItemDescription2001-0005Taper: CAT40, Collet Series: ER16, Projection Length:   2.76", Range: 1/32"-3/8"2001-0010Taper: CAT40, Collet Series: ER16, Projection Length:   4", Range: 1/32"-3/8"2001-0025Taper: CAT40, Collet Series: ER20, Projection Length:   2.76", Range: 1/16"-1/2"2001-0030Taper: CAT40, Collet Series: ER20, Projection Length:   4", Range: 1/16"-1/2"2001-0015Taper: CAT40, Collet Series: ER32, Projection Length:   2.76", Range: 3/32"-25/32"2001-0020Taper: CAT40, Collet Series: ER32, Projection Length:   4", Range: 3/32"-25/32"2001-0035Taper: CAT40, Collet Series: ER40, Projection Length:   2.76", Range: 1/8"-1"2001-0040Taper: CAT40, Collet Series: ER40, Projection Length:   4", Range: 1/8"-1"3001-0020Taper: BT40, Collet Series: ER32, Projection Length:   4", Range: 3/32"-25/32"

ER 32 Collet ChuckFeatures:Compatible with: CNC Milling Lathe Tool Engraving MachineMount to your choice of backplate to use on a lathe.Can also be used as a fixture on a milling table.ER wrench includedItemDescriptionER32-0080D1:3.149",D:2.165",L:1.653",d:1.259"ER32-0100D1:3.937",D:2.834",L:1.653",d:1.259"

Hex ER-32 Collet BlockFeatures:Use standard ER collets for fast set-ups on CNC machinesFor parallel, square or hex shapes as well as for cross-hole drilling at 60, 90 or 120 degreesMade of Alloy tool steel hardened and ground to 0.0005" flatness, sureness and parallelismMay be used standing uprightBlock dimensions are approximately 1-3/4" x 1-3/4" x 2-3/4" long.15/16" through hole allows for long parts to be machined.ER wrench included.ItemDescription6920-32061-3/4" x 1-3/4" x 2-3/4"

Square ER-32 Collet BlockFeatures:Use standard ER collets for fast set-ups on CNC machinesFor parallel, square or hex shapes as well as for cross-hole drilling at 60, 90 or 120 degreesMade of Alloy tool steel hardened and ground to 0.0005" flatness, sureness and parallelismMay be used standing uprightBlock dimensions are approximately 1-3/4" x 1-3/4" x 2-3/4" long.15/16" through hole allows for long parts to be machined.ER wrench included.ItemDescription6920-32041-3/4" x 1-3/4" x 2-3/4"

3" Dia. 7 Flute, 90° Square Shoulder Indexable Face Mill With 7Pcs APKT1604 Inserts With Caterpillar V-Flange CAT-40 Face Mill HolderFeatures:● All "V" flange tooling are interchangeable with brown & sharp,   burgmaster, carboloy, cincinnati milacron, de vlieg, erickson,   excelled, mooggy, print & whiney, universal, valence,   white sand strand and other machining centers.● Shank: CAT40 x 1" - 2-1/16"● Draw bar thread: 5/8"-11● 6780-7104 as Page 24, 50Features:● Cutting diameter: 3"● 90° cutting angle● Screw down insert● Radial rake angle: -10°● Axial rake angle: +7°● All types of square shoulder face milling,   side milling and full slot milling (shaft end   mills) of steels, alloyed steels, stainless   and heat resistant steels, case irons and   aluminum alloys.● 4508-0018 as Page 63ItemDescription7104-4518Shank: CAT40 x 1" - 2-1/16"; Cutting diameter: 3"

ISO40 Holder For ER40 Collet, With Thread 5/8"-11, Length:100mmItemDescription0536-0004ISO40 holder for ER40 collet, with thread   5/8"-11,length:100mm

3/4" Straight Shank ER16 Collet ChucksFeatures:Made of high quality alloy steelHardened to RC56 - 60Precision ground0.0002" TIR or betterItemDescription0223-0207Collet Capacity: 0.02"-0.393"0223-0208Collet Capacity: 0.02"-0.393"0223-0209Collet Capacity: 0.02"-0.393"

Pull Stud Retention Knob For V-Flange Caterpillar ToolingFeatures:Made from alloy steel with heat treatment and hardened to HRC 58.Each retention knob is individually magnetic particle tested to protect against cracking.All mating surfaces precision ground.ItemDescriptionCAT405/8-11"Thread6780-0041D1: 0.740", D2:0.490", D3:0.280",   D4:0.636", L:1.625", L1:0.440", Hole6780-0042D1: 0.740", D2:0.490", D3:N/A, D4:0.636",   L:1.625", L1:0.440", Solid6780-1025D1: 0.589", D2:0.392", D3:N/A, D4:0.636",   L:2.250", L1:0.988", Solid6780-1044D1: 0.589", D2:0.392", D3:0.200",   D4:0.636", L:2.250", L1:0.988", Hole6780-0141D1: 0.740", D2:0.490", D3:N/A, D4:0.636",   L:1.625", L1:0.440", SolidCAT501/8" Thread6780-0044D1: 1.14", D2:0.820", D3:0.468", D4:N/A,   L:2.30", L1:0.70", Hole6780-0045D1: 1.14", D2:0.820", D3:N/A, D4:N/A,   L:2.30", L1:0.70", Solid6780-1055D1: 0.903", D2:0.668", D3:N/A, D4:3.080",   L:1.384", L1:1.778", Solid6780-1057D1: 0.903", D2:0.668", D3:0.390",   D4:1.026", L:3.355", L1:1.778", Hole 

Shank For Tapping HeadItemDescription0222-0750Taper Size: 2MT Jacobs Taper: JT60222-0757Taper Size: 3MT Jacobs Taper: JT60222-0763Taper Size: 4MT Jacobs Taper: JT60222-0775Taper Size: R8 Jacobs Taper: JT6ITH5-4062Taper Size: 3MT Jacobs Taper: 20mm ThreadITH5-4064Taper Size: 4MT Jacobs Taper: 20mm ThreadITH5-4066Taper Size: R8 Jacobs Taper: 20mm Thread

R8 Shank ER Collet ChucksFeatures:Made of high grade tool steelHardened and precision groundMax TIR 0.0002" O.D to I.DItemDescription0223-0240Type: ER40 Drawbar End: 7/16"-200223-0232Type: ER32 Drawbar End: 7/16"-20

CAT40 V-Flange Collet Chuck         For ER16, ER32, ER40 Collet.Made of alloy forged steel, Hardened to HRC 52-56.Draw Bar Thread 5/8-11.ItemDescription1601-0005Taper:CAT40; Collet Series:ER16;   Projection Length:2.76"; Range:1/8"-7/16"1601-0010Taper:CAT40; Collet Series:ER16;   Projection Length:4"; Range:1/8"-7/16"1601-0025Taper:CAT40; Collet Series:ER20;   Projection Length:2.76"; Range:1/8"-1/2"1601-0030Taper:CAT40; Collet Series:ER20;   Projection Length:4"; Range:1/8"-1/2"1601-0015Taper:CAT40; Collet Series:ER32;   Projection Length:2.76"; Range:1/8"-3/4"1601-0020Taper:CAT40; Collet Series:ER32;   Projection Length:4"; Range:1/8"-3/4"1601-0035Taper:CAT40; Collet Series:ER40;   Projection Length:2.76"; Range:1/8"-1"1601-0040Taper:CAT40; Collet Series:ER40;   Projection Length:4"; Range:1/8"-1"