HSK(A) - ER Collet Chuck, Blanced to G2.5/25,000RPM

Item: 4121-0601
Item2: 4121-0602
Item4: 4121-0603
Item3: 4121-0604
Item0: 4121-0605
Item5: 4121-0606
Item6: None
Item7: None
Item8: None
Item9: None
Item10: None
Precision Steel Ruler

Precision Steel RulerFeatures:Ruler constructed of hardened stainless steelEtched black numerals and graduations are easy to read4R: 8ths,16ths,32nds,64thsItemDescriptionEG06-4008Grad:4R,L. x W.:6" x 3/4",Thickness:0.032"EG06-4014Grad:4R,L. x W.:12" x 1",Thickness:0.040"

Item: EG06-4014
Item2: None
Item4: None
Item3: None
Item0: EG06-4008
Item5: None
Item6: None
Item7: None
Item8: None
Item9: None
Item10: None
Pull Stud Retention Knob For V-Flange Caterpillar Tooling

Pull Stud Retention Knob For V-Flange Caterpillar ToolingFeatures:Made from alloy steel with heat treatment and hardened to HRC 58.Each retention knob is individually magnetic particle tested to protect against cracking.All mating surfaces precision ground.ItemDescriptionCAT405/8-11"Thread6780-0041D1: 0.740", D2:0.490", D3:0.280",   D4:0.636", L:1.625", L1:0.440", Hole6780-0042D1: 0.740", D2:0.490", D3:N/A, D4:0.636",   L:1.625", L1:0.440", Solid6780-1025D1: 0.589", D2:0.392", D3:N/A, D4:0.636",   L:2.250", L1:0.988", Solid6780-1044D1: 0.589", D2:0.392", D3:0.200",   D4:0.636", L:2.250", L1:0.988", Hole6780-0141D1: 0.740", D2:0.490", D3:N/A, D4:0.636",   L:1.625", L1:0.440", SolidCAT501/8" Thread6780-0044D1: 1.14", D2:0.820", D3:0.468", D4:N/A,   L:2.30", L1:0.70", Hole6780-0045D1: 1.14", D2:0.820", D3:N/A, D4:N/A,   L:2.30", L1:0.70", Solid6780-1055D1: 0.903", D2:0.668", D3:N/A, D4:3.080",   L:1.384", L1:1.778", Solid6780-1057D1: 0.903", D2:0.668", D3:0.390",   D4:1.026", L:3.355", L1:1.778", Hole 

Item: 6780-1025
Item2: 6780-0141
Item4: 6780-0044
Item3: 6780-1057
Item0: 6780-0041
Item5: None
Item6: None
Item7: None
Item8: None
Item9: None
Item10: None
Morse Taper #2 Round Collets Set

Morse Taper #2 Round Collets SetFeatures:Size include: 1/8", 3/16", 1/4", 5/16", 5/8", 7/16", & 1/2"Threads for drawbar: 3/8"-16Hardened and groundAccuracy: 0.0006" TIRItemDescription0223-0311Size include: 1/8", 3/16", 1/4", 5/16", 5/8", 7/16", & 1/2"

Item: None
Item2: None
Item4: None
Item3: None
Item0: 0223-0311
Item5: None
Item6: None
Item7: None
Item8: None
Item9: None
Item10: None
Precision Screwless Vise

Precision Screwless ViseFeatures:Produced of high quality steel, carburized to wsurface hardness: HRC55-60Parallelism 0.003mm/100mm, squareness 0.005mm/100mmQuickly to clamp and easy to operateUsed for precision measurement and inspection precision grinding, EDM and wire-cutting machineGuarantee high accuracy in any positionMaterial 20GrMnTiHas ground “V” way, Detachable replacement jawsStong fitted boxItemDescription0536-VB2563mm0536-VB3073mm0536-VB3588mm

Item: 0536-VB30
Item2: 0536-VB35
Item4: None
Item3: None
Item0: 0536-VB25
Item5: None
Item6: None
Item7: None
Item8: None
Item9: None
Item10: None
Precision Toolmakers Vise

Precision Toolmakers ViseFeatures:Produced of high quality steel, carburized to wsurface hardness: HRC55-60Parallelism 0.003mm/100mm, squareness 0.005mm/100mmQuickly to clamp and easy to operateUsed for precision measurement and inspection precision grinding, EDM and wire-cutting machineGuarantee high accuracy in any positionMaterial 20GrMnTiHas ground “V” way, Detachable replacement jawsStong fitted boxItemDescription0536-VS2048mm0536-VS2563mm0536-VS3073mm0536-VS3588mm

Item: 0536-VS25
Item2: 0536-VS30
Item4: 0536-VS35
Item3: None
Item0: 0536-VS20
Item5: None
Item6: None
Item7: None
Item8: None
Item9: None
Item10: None
Shank For Tapping Head

Shank For Tapping HeadItemDescription0222-0750Taper Size: 2MT Jacobs Taper: JT60222-0757Taper Size: 3MT Jacobs Taper: JT60222-0763Taper Size: 4MT Jacobs Taper: JT60222-0775Taper Size: R8 Jacobs Taper: JT6ITH5-4062Taper Size: 3MT Jacobs Taper: 20mm ThreadITH5-4064Taper Size: 4MT Jacobs Taper: 20mm ThreadITH5-4066Taper Size: R8 Jacobs Taper: 20mm Thread

Item: 0222-0775
Item2: ITH5-4062
Item4: ITH5-4066
Item3: None
Item0: 0222-0750
Item5: None
Item6: None
Item7: None
Item8: None
Item9: None
Item10: None
All-Angle V-Block & Clamp

All-Angle V-Block & ClampApplications: For grinding, milling and drilling work. Features: Made of hardened and precision ground tool steel. Sides are parallel and vee is central and ground. Central hole is provided for drilling or removing pins. "V" block has (4)3/8"-16 tapped holes,(2) in the base and (1) on each side for angle iron clamping.Block is provided with black oxidized clamp.Parallelism tolerance of vee axis to base:within 0.0003"/8 micronsDimensions:3-5/8" Lx 1-7/8"Wx1-7/8"HMaximum capacity of vee: 1-5/16" diameter.ItemDescriptionEG05-3050All-Angle V-Block &Clamp

Item: None
Item2: None
Item4: None
Item3: None
Item0: EG05-3050
Item5: None
Item6: None
Item7: None
Item8: None
Item9: None
Item10: None
MT2 Shank ER32 Chuck With 11pc Collets  Set

MT2 Shank ER32 Chuck With 11pc Collets  SetFeatures:11pc ER32 collet set : 1/8" - 3/4" by 16th (1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4")All collets are made of high quality alloy spring steel. 0.0005" accuracyHardened and precision ground1pc MT2 shank ER32 collet chuck. Draw bar threads 3/8" x 161pc ER32 spannerFitted plastic caseItemDescription0223-030311pc ER32   collet set : 1/8" - 3/4" by 16th,      1pc MT2 shank ER32 collet chuck, 1pc ER32   spanner

Item: None
Item2: None
Item4: None
Item3: None
Item0: 0223-0303
Item5: None
Item6: None
Item7: None
Item8: None
Item9: None
Item10: None
R8 Shank ER Collet Chucks

R8 Shank ER Collet ChucksFeatures:Made of high grade tool steelHardened and precision groundMax TIR 0.0002" O.D to I.DItemDescription0223-0240Type: ER40 Drawbar End: 7/16"-200223-0232Type: ER32 Drawbar End: 7/16"-20

Item: 0223-0232
Item2: None
Item4: None
Item3: None
Item0: 0223-0240
Item5: None
Item6: None
Item7: None
Item8: None
Item9: None
Item10: None
5C Shank ER32 Chuck With 11PC Collets Set

5C Shank ER32 Chuck With 11PC Collets SetFeatures:11pc ER32 collet set : 1/8" - 3/4" by 16th (1/8", 3/16", 1/4", 5/16", 3/8", 7/16",1/2", 9/16", 5/8", 11/16", 3/4")All collets are made of high quality alloy spring steel. 0.0005" accuracyHardened and precision ground1pc 5C shank ER32 collet chuck. End of 5C shank is O.D and I.D threaded.1pc ER32 spannerFitted plastic caseItemDescription0223-030111pc   ER32 collet set : 1/8" - 3/4" by 16th,  1pc    5C shank ER32 collet   chuck ,1pc   ER32 spanner

Item: None
Item2: None
Item4: None
Item3: None
Item0: 0223-0301
Item5: None
Item6: None
Item7: None
Item8: None
Item9: None
Item10: None
Precision Bevel Edge Square DIN 875

Precision Bevel Edge Square DIN 875Blade: 6"Beam: 4"Made of Steel hardened to Rockwell 55Features:Squares have accurate right angles both inside and outsideMade from a single piece of fully seasoned tool steelAll squares are fully hardenedBlades are beveled on both edges of each sideBeams and blades are ground and accuratelylapped for straightness and parallelismItemDescription0303-8303Grade 00, 6"x4"0303-6203Grade 0, 6"x4"

Item: 0303-6203
Item2: None
Item4: None
Item3: None
Item0: 0303-8303
Item5: None
Item6: None
Item7: None
Item8: None
Item9: None
Item10: None
Multi-Use V Block And Clamp Set

Multi-Use V Block And Clamp SetFeatures: Stepped groove construction permits low or high clamping.Holds square or round work. Hardened steelSold in matched pairAll sides precision ground parallel and square.Size: 2-3/8x2-3/4x2"Capacity: 2" round, 1-7/16" square.ItemDescription0303-02192-3/8x2-3/4x2"

Item: None
Item2: None
Item4: None
Item3: None
Item0: 0303-0219
Item5: None
Item6: None
Item7: None
Item8: None
Item9: None
Item10: None
Digital Protractor

Digital Protractor● Measures: 360°,0° to 90° in each quadrant,  with standard counter-clockwise roation.● Machined aluminum frame● Reset mode and self calibration mode● Large clear LCD Display● Instantly shows level, true vertical, and any angle in    between● Hold button freeze for convenient out of sight    measurements● V-Groove on the top plate for accurate registration on    curved or cylindrical surfaces and tapped 6-32 holes    in base plate for special mounting● 3V lithium battery● Dimension: 6" x 2.4" x 1.23"ItemDescription8220-1000Dimension: 6" x 2.4" x   1.23"

Item: None
Item2: None
Item4: None
Item3: None
Item0: 8220-1000
Item5: None
Item6: None
Item7: None
Item8: None
Item9: None
Item10: None
Precision Toolmakers Vise

Precision Toolmakers ViseFeatures:With V-grooved jaw Hardened and ground Square and parallel within 0.0002" One-piece body construction.ItemDescription0235-0310Jaw Width:2-3/8",Jaw Opening:3-3/8",Jaw Depth:1-1/4",Vise Length:7-1/8"0235-0311Jaw Width:3-1/2",Jaw Opening:4-3/4",Jaw Depth:1-9/16",Vise Length:10"0235-0312Jaw Width:4",Jaw Opening:4-3/4",Jaw Depth:1-3/4",Vise Length:10-1/4"

Item: 0235-0311
Item2: 0235-0312
Item4: None
Item3: None
Item0: 0235-0310
Item5: None
Item6: None
Item7: None
Item8: None
Item9: None
Item10: None
Product
info@zzwtools.com

ZZW PRECISION TOOL SUPPLY (SHANGHAI)CO.,LTD

Add: #4F, No.6 Building, #528 RuiQing Rd., East ZhangJiang, 

PuDong 201201, Shanghai,P.R.China  





Moblin Link