5C Hex Collet 7pc SetFeatures:7pcs/set: 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 7/8".Made of high quality spring steelHardened and precision groundCollet end OD & ID threadedAccuracy: 0.0005" TIRItemDescription0223-03097pcs/set: 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 7/8"
Premium Series,BT40,CAT40 ER Floating Tap Collet ChuckFeatures:Ideal for holding taps and reamers forlight duty tapping tasks0.197 compression and 0.315 extensive travelsvia adjustable internal springsUsing standard ER colletAll critical surfaces precision groundMade from alloy steel hardened to 54-56 HRCRear thread for pull stud:CAT40: 5/8 " -11BT40: M16 x 2ItemDescription0537-5983Taper: CAT40, Collet Series: ER16, D: 1.10", L: 3.020", Compression(F1): 0.197", Extension(F2): 0.315"0537-5984Taper: CAT40, Collet Series: ER20, D: 1.34", L: 3.386", Compression(F1): 0.197", Extension(F2): 0.315"0537-5985Taper: CAT40, Collet Series: ER32, D: 1.65", L: 3.543", Compression(F1): 0.197", Extension(F2): 0.315"0537-6566Taper: BT40, Collet Series: ER16, D: 1.10", L: 3.031", Compression(F1): 0.197", Extension(F2): 0.315"0537-6577Taper: BT40, Collet Series: ER32, D: 1.65", L: 3.543", Compression(F1): 0.197", Extension(F2): 0.315"
Premium Series, V-Flange ER Collet Chuck,Balanced to 20,000 RPM at G2.5Features:All ground bodyMade from alloy steel hardened to HRC 52-56Taper accurately ground exceeding AT3 standardFactory balanced to save spindle life, and tool life,and increased productivity.Concentricity less than 0.0002” from taper to collet faceCertification included with each holder, documented TIR,taper accuracy, and balance measurement.Coolant through capacityDraw bar thread CAT-40: 5/8"-11 BT40: M16x2Balanced to 20,000 RPM at G2.5Wrench not includedItemDescription2001-0005Taper: CAT40, Collet Series: ER16, Projection Length: 2.76", Range: 1/32"-3/8"2001-0010Taper: CAT40, Collet Series: ER16, Projection Length: 4", Range: 1/32"-3/8"2001-0025Taper: CAT40, Collet Series: ER20, Projection Length: 2.76", Range: 1/16"-1/2"2001-0030Taper: CAT40, Collet Series: ER20, Projection Length: 4", Range: 1/16"-1/2"2001-0015Taper: CAT40, Collet Series: ER32, Projection Length: 2.76", Range: 3/32"-25/32"2001-0020Taper: CAT40, Collet Series: ER32, Projection Length: 4", Range: 3/32"-25/32"2001-0035Taper: CAT40, Collet Series: ER40, Projection Length: 2.76", Range: 1/8"-1"2001-0040Taper: CAT40, Collet Series: ER40, Projection Length: 4", Range: 1/8"-1"3001-0020Taper: BT40, Collet Series: ER32, Projection Length: 4", Range: 3/32"-25/32"
One Pair Magnetic Chuck Parallels 2ps/PairApplications:● "V" blocks are universal (hold in any direction on a magnetic chuck).Features:● Cast integrally with aluminum to ensure the blocks will never crack or become loose even when accidentally dropped.● Steel used is selected for the highest magnetic transfer and low retention of magnctic flux.Includes:Model # 1●1"x2"x4" micro parallels ground all overand serial numbered in pairs.ItemDescriptionEG06-2001One Pair Magnetic Chuck Parallels
Universal "V" BlockFeatures:● Cast integrally with aluminum to ensure the blocks will never crack or become loose even when accidentally dropped.● Steel used is selected for the highest mangnetic transfer and low retention of magnctic flux.● "V" blocks are universal (hold in any direction on a magnetic chuck).● Two V's: 1-7/8"x2-3/8"x2".● Large V: 2" round capacity.● Small V: 1/2" round capacity.ItemDescriptionEG06-2004Universal "V" block
Precision Angle PlateFeatures:Solid one-piece steel construction Hardened to Rc58-62 Ground flat, square and parallel to 0.0002" ItemDescription2200-0901Size:4"x3"x3"; Thick: 1"; Number of holes: 13Tapped 1/4"-202200-0903Size:4"x4"x4"; Thick: 1-1/4"; Number of holes: 13Tapped 1/4"-202200-0904Size:6"x6"x4"; Thick: 1-1/4"; Number of holes: 26Tapped 1/4"-20
ER 32 Collet ChuckFeatures:Compatible with: CNC Milling Lathe Tool Engraving MachineMount to your choice of backplate to use on a lathe.Can also be used as a fixture on a milling table.ER wrench includedItemDescriptionER32-0080D1:3.149",D:2.165",L:1.653",d:1.259"ER32-0100D1:3.937",D:2.834",L:1.653",d:1.259"
Hex ER-32 Collet BlockFeatures:Use standard ER collets for fast set-ups on CNC machinesFor parallel, square or hex shapes as well as for cross-hole drilling at 60, 90 or 120 degreesMade of Alloy tool steel hardened and ground to 0.0005" flatness, sureness and parallelismMay be used standing uprightBlock dimensions are approximately 1-3/4" x 1-3/4" x 2-3/4" long.15/16" through hole allows for long parts to be machined.ER wrench included.ItemDescription6920-32061-3/4" x 1-3/4" x 2-3/4"
Square ER-32 Collet BlockFeatures:Use standard ER collets for fast set-ups on CNC machinesFor parallel, square or hex shapes as well as for cross-hole drilling at 60, 90 or 120 degreesMade of Alloy tool steel hardened and ground to 0.0005" flatness, sureness and parallelismMay be used standing uprightBlock dimensions are approximately 1-3/4" x 1-3/4" x 2-3/4" long.15/16" through hole allows for long parts to be machined.ER wrench included.ItemDescription6920-32041-3/4" x 1-3/4" x 2-3/4"
3" Dia. 7 Flute, 90° Square Shoulder Indexable Face Mill With 7Pcs APKT1604 Inserts With Caterpillar V-Flange CAT-40 Face Mill HolderFeatures:● All "V" flange tooling are interchangeable with brown & sharp, burgmaster, carboloy, cincinnati milacron, de vlieg, erickson, excelled, mooggy, print & whiney, universal, valence, white sand strand and other machining centers.● Shank: CAT40 x 1" - 2-1/16"● Draw bar thread: 5/8"-11● 6780-7104 as Page 24, 50Features:● Cutting diameter: 3"● 90° cutting angle● Screw down insert● Radial rake angle: -10°● Axial rake angle: +7°● All types of square shoulder face milling, side milling and full slot milling (shaft end mills) of steels, alloyed steels, stainless and heat resistant steels, case irons and aluminum alloys.● 4508-0018 as Page 63ItemDescription7104-4518Shank: CAT40 x 1" - 2-1/16"; Cutting diameter: 3"
ISO40 Holder For ER40 Collet, With Thread 5/8"-11, Length:100mmItemDescription0536-0004ISO40 holder for ER40 collet, with thread 5/8"-11,length:100mm
3/4" Straight Shank ER16 Collet ChucksFeatures:Made of high quality alloy steelHardened to RC56 - 60Precision ground0.0002" TIR or betterItemDescription0223-0207Collet Capacity: 0.02"-0.393"0223-0208Collet Capacity: 0.02"-0.393"0223-0209Collet Capacity: 0.02"-0.393"
5C Shank ER40 Chuck With 15pc Collets SetFeatures:15pc ER40 collet set : 1/8" - 1" by 16th (1/8", 3/16", 1/4", 5/16", 3/8", 7/16",1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1")All collets are made of high quality alloy spring steel. 0.0005" accuracyHardened and precision ground1pc 5C shank ER40 collet chuck. End of 5C shank is O.D and I.D threaded.1pc ER40 spannerFitted plastic caseItemDescription0223-030215pc ER40 collet set : 1/8" - 1" by 16th , 1pc 5C shank ER40 collet chuck, 1pc ER40 spanner
3/4" Straight Shank ER32 Chuck With 11pc Collets SetFeatures:11pc ER32 collet set : 1/8" - 3/4" by 16th (1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4")All collets are made of high quality alloy spring steel. 0.0005" accuracyHardened and precision ground1pc 3/4" x 2" straight shank ER32 collet chuck. Draw bar threads 3/8" x 161pc ER32 spannerFitted plastic caseItemDescription0223-030511pc ER32 collet set : 1/8" - 3/4" by 16th, 1pc 3/4" x 2" straight shank, 1pc ER32 spanner
ER-16 Collet Set & ChuckFeatures:10pcs ER16 chucks set includes the following collet size: 1/32", 1/16", 3/32", 1/8", 3/16", 7/32", 1/4", 5/16", 11/32", 3/8"1pc spanner + 1pc clamping nut1pc chuck holderFitted plastic caseItemDescriptionCT40-ER1610pcs ER16 chucks set includes the following collet size: 1/32", 1/16", 3/32", 1/8", 3/16", 7/32", 1/4", 5/16", 11/32", 3/8", 1pc spanner + 1pc clamping nut, 1pc CAT40-ER16 - 2.75" chuck holder0223-03073/4" x 3.35"