REPLACEMENT INSERTS: http://www.zzwtools.com/product/4670482/
Profile Wheel DresserFeatures:Convex radii: 0 to 1.500" Concave Radii: 0.03" to 1.500" Dressing Capacity Up to 8" wheel Dia Height to center of diamond: 6-1/2" Overall Height: 7" Base dimensions: 4-3/4 x 3-1/2 x 1-1/4" Diamond is not included ItemDescriptionEG11-0400Profile Wheel Dresser
Precision Medium Duty Live Center for General Purpose on Manual Engine LatheFeatures: Accuracy guaranteed within 0.0003" The live center has a combination of deep groove ball bearing,thrust ball bearing and needle bearing. The anti-dust seal can prevent cutting fluid and dust from entering into the center bearing The 60° rotating spindle is made from carbon alloy steel with heat treat to HRC 58±2 for high rigidity and wear resistanceItemDescription0537-6436Model: MT20537-6437Model: MT30537-6438Model: MT4
Mini Digital Angle Protractor 0-360° With Magnetic BaseFeatures:Small, light (about 127g) and portable.Large LCD display for reading.Measure data holding.Magnet in measuring faces can be easy attracted to the object to be measured.Display always reads upright,no matter which way the mini protractor is turned.Degree and slope conversionAuto power off,low battery warning.Measuring range:4x90°Resolution:0.1°Battery Type:3V CR2032X3Working Temperature:0°C~40°C.Relative Humidity:40%~80%.Dimension:2"x2"x1"ItemDescriptionD810-1000Range:4x90°, Resolution:0.1°
Dial Reading Bevel ProtractorFeatures:Useful and accurate setting tool for bevel, transferringangle and many other applicationsMeasuring range: 4 x 90°Blade is secured firmly by the lock nut at an angleDial window displays readout of each 10°Indicator pointer shows each degree and each5 minutes of angleIncludeds 6" & 12" blade, an acute angleattachment and fitted caseItemDescriptionS855-3012DIAL READING BEVEL PROTRATOR
Speed Handle For Machine ViseFeatures:3/4" Hex. hub Move the vise jaw much faster. ItemDescription1100-8116SPEED HANDLE FOR MACHINE VISE
Super Angle Lock Precision Swivel Base Milling Machine ViseFeatures:● With swivel base● Removable hinged handle for fast locking● Provides better clamping pressureItemDescriptionFA20-4204Length: 13.582", Width: 8.858", Height: 4.724"FA20-4206Length: 17.322", Width: 10.944", Height: 6.023"
BT40 Tool Holder Tightening Fixture For Universal CNC Equipment, Double Head Anodized HardenedFeatures:Applicable model is BT40Realize Double-end Mounting, facilitate mount and dismount.Modern design, protect the conical surface of the tool holder.Sliding block positioning design, correct orientation and non-skid.Adopt new material, detailed and comprehensive protection.Match for BT40 tool holer type: BT40 L: 255mm W: 140mm H: 140mmWhen installing the CNC tools on machine tools, some parts such as tools and pull studs need to installed on tool holders. Because of the specific form of the CNC tools, the traditional tool lock seat can’t satisfy the tighten or unscrew requirement during production, assembling and using. There are an upward direction lock snap ring and a downward direction lock snap ring on the dicephalous tool lock base. They can satisfy the installation of CNC pull studs, ER nuts, and Tools, etc. from both directions.ItemDescriptionBT40-8540L: 255mm W: 140mm H: 140mm
CAT40 Collet Chuck Tightening Fixture Fit CAT40 Tool Holder as Well as SK40 and JT40 HOLDERFeatures:Applicable model is CAT 40 or SK40 or JT 40Correct orientation and non-slip quench hardeningEasy to install, reliable, protect tool holder,could bear greater torque, avoid skiddingThe material is aluminum alloyNovel hollow design, protect the conical surface of the tool holder.Adopt new material, detailed and comprehensive protection.Match for CT40 tool holer type as well as SK40 and JT40When installing the CNC tools on machine tools, some parts such as tools and pull studs need to installed on tool holders.Because of the specific form of the CNC tools, the traditional tool lock seat can’t satisfy the tighten or unscrew requirement during production, assembling and using. There are an upward direction lock snap ring and a downward direction lock snap ring on the dicephalous tool lock base. They can satisfy the installation of CNC pull studs, ER nuts, and Tools, etc. from both directions.ItemDescriptionCT40-7840Applicable model is CAT 40 or SK40 or JT 40
ER Collet System With CAT40 or BT40 Chuck Balancing Grade G6.3/12,000RPMItem: CT40-ER40● 15pcs ER40 collet set includes thefollowing collet sizes:1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2,9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, & 1"● 1pc spanner + 1pc clamping nut● CAT40-ER40-80mm chuck holderItem: BT40-ER40● 15pcs ER40 collet set includes the followingcollet sizes:1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2,9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, & 1"● 1pc spanner + 1pc clamping nut● BT40-ER40-80mm chuck holderItem: BT40-ER32● 12pcs ER32 collet set includes the followingcollet sizes:3/32, 1/8, 3/16, 1/4, 5/16, 3/8, 7/16,3/4, 9/16, 5/8, 1/2, & 11/16".● 1pc spanner + 1pc clamping nut● BT40-ER32-70mm chuck holderItem: CT40-ER32● 12pcs ER32 collet set includes the followingcollet sizes:3/32, 1/8, 3/16, 1/4, 5/16, 3/8,7/16, 3/4, 9/16, 5/8, 1/2, & 11/16".● 1pc spanner + 1pc clamping nut● CT40-ER32-70mm chuck holderItemDescriptionCT40-ER4015pc ER40 chucks setCT40-ER3212pc ER32 chucks setBT40-ER4015pc ER40 chucks setBT40-ER3212pc ER32 chucks set
M42-8% Premium Cobalt End Mill,4 FluteItemDescriptionCO-181/8"X3/8"X3/8"X2-5/16"CO-3163/16"X3/8"X1/2"X2-3/8"CO-141/4"X3/8"X5/8"X2-7/16"CO-5165/16"X3/8"X3/4"X2-1/2"CO-383/8"X3/8"X3/4"X2-1/2"CO-7167/16"X1/2"X1"X2-3/4"CO-121/2"X1/2"X1-1/4"X3-1/4"CO-9169/16"x1/2"x1-3/8"x3-3/8"CO-585/8"X5/8"X1-5/8"X3-3/4"CO-111611/16"X5/8"X1-5/8"X3-3/4"CO-343/4“x3/4"x1-5/8"x3-7/8"CO-131613/16"X3/4"X1-7/8"X4-1/8"CO-787/8"X3/4"X1-7/8"X4-1/8"CO-151615/16"X3/4"X1-7/8"X4-1/8"CO-1341"X3/4"X1-7/8"X4-1/8"CO-11"X1"X2"X4-1/2"