CAT40 Collet Chuck Tightening Fixture Fit CAT40 Tool Holder as Well as SK40 and JT40 HOLDERFeatures:Applicable model is CAT 40 or SK40 or JT 40Correct orientation and non-slip quench hardeningEasy to install, reliable, protect tool holder,could bear greater torque, avoid skiddingThe material is aluminum alloyNovel hollow design, protect the conical surface of the tool holder.Adopt new material, detailed and comprehensive protection.Match for CT40 tool holer type as well as SK40 and JT40When installing the CNC tools on machine tools, some parts such as tools and pull studs need to installed on tool holders.Because of the specific form of the CNC tools, the traditional tool lock seat can’t satisfy the tighten or unscrew requirement during production, assembling and using. There are an upward direction lock snap ring and a downward direction lock snap ring on the dicephalous tool lock base. They can satisfy the installation of CNC pull studs, ER nuts, and Tools, etc. from both directions.ItemDescriptionCT40-7840Applicable model is CAT 40 or SK40 or JT 40

58 Pcs Deluxe Steel Slamping Kit, Table Slot 5/8",Stud Size 1/2"-13Features:● Table slot: 5/8"● Stud size: 1/2"-13● Block width: 1"● Quality kit for a bridgeportIncluded:● 24 studs;4 pieces 3", 4", 5", 6", 7", & 8" Long● 4 coupling nuts● 6 flange nuts● 6 T-slot nuts● 6 serrated end clamps● 12 step blocks● Wall HolderItemDescription4230-262658 Pcs Deluxe Steel Slamping Kit, Table Slot 5/8",Stud   Size 1/2"-13

Circul Permanent Magnetic ChuckFeatures:The round fine pitch permanent magnet chuck is suitable for grinder and lathe, best for longer and thicker workpieceThe round micro pitch permanent magnetic chuck is suitable for grinding application, best for smaller and thinner workpiece.High holding power: max 140lbs/sq.in.Steel pole spacing: 1/16", brass pole spacing: 1/32"ItemDescription1151-1150D:7.874",H:2.008",K:0.079",C:6.299",E:7.087",Z-M:4xM8,Weight:10kg1151-2200D:6.299",H:1.929",K:0.079",C:4.921",E:5.512",Z-M:4xM8,Weight:6.5kg

CAT50 / SK50 / JT 50 Collet Chuck Tightening Fixture Fit CAT50 Tool HolderFeatures:Applicable model is CAT50 as well as SK50 and JT50 Tool HolderCorrect orientation and non-slip quench hardeningEasy to install, reliable, protect tool holder, could bear greater torque, avoid skiddingThe material is aluminum alloyNovel hollow design, protect the conical surface of the tool holder.Adopt new material, detailed and comprehensive protection.Match for CT50 tool holer type as well as SK50 and JT50When installing the CNC tools on machine tools, some parts such as tools and pull studs need to installed on tool holders. Because of the specific form of the CNC tools, the traditional tool lock seat can’t satisfy the tighten or unscrew requirement during production, assembling and using. There are an upward direction lock snap ring and a downward direction lock snap ring on the dicephalous tool lock base. They can satisfy the installation of CNC pull studs, ER nuts, and Tools, etc. from both directions.ItemDescriptionCT50-7850Applicable model is CAT50 as well as SK50 and JT50 Tool   Holder

BT30 Tool Holder Tightening Fixture For Universal CNC Equipment, Double Head Anodized HardenedFeatures:Applicable model is BT30Realize Double-end Mounting, facilitate mount and dismount.The material is aluminum alloy, alloy steel composite.Easy to install, reliable, protect tool holder, could bear greater torque, avoid skiddingSliding block positioning design, correct orientation and non-skid.Adopt new material, detailed and comprehensive protection.Match for BT30 tool holer typeWhen installing the CNC tools on machine tools, some parts such as tools and pull studs need to installed on tool holders. Because of the specific form of the CNC tools, the traditional tool lock seat can’t satisfy the tighten or unscrew requirement during production, assembling and using. There are an upward direction lock snap ring and a downward direction lock snap ring on the dicephalous tool lock base. They can satisfy the installation of CNC pull studs, ER nuts, and Tools, etc. from both directions.ItemDescriptionBT30-8530Match For BT30ToolHoler Type

Mill StopFeatures:Serves as a rigid stop for milling set-ups.  Used with vises, angle plate, jigs, etc Use as a versatile holder, as well as stop           Column:3/4" x6-1/4"            Base:3/4" x2" x4-1/2"            Rod:3/8" x10"  ItemDescriptionABQK-0100Range:3/8"-3/4"

Sine DresserFeatures:Cross feed up to 50mm Center distance is 50mm within 0.01mm accuracy  Dresses grinding wheel to any angle from 0 to 60 degreeEasy structure and easy operation, the drinding wheel dresser can be adjusted within 0-60°， the tolerance distance between two spindles is ±0.01mm, high accuracy and quality, it can dress any angles of wheel surface by its horizontal and vertical.ItemDescription2310-7000Sine Dresser

Universal Angle Block SetFeatures:Tolerance ±1". Hardness HRC 45-50°. All ground finish. No sice vise,sine plate,angle vise,angle chart or block gage needed. Vee Block dimensions:3"long,1-3/16" wide ,1-3x16"highAngle plate dimensions:2-3/4"long,1-3/16"wide 5/64" high at the narrow end.Set Includes:  V-Block 10°,15°,30°.  Angle Plate 1°, 2°,3°,4°,5°.ItemDescriptionEG02-0224UNIVERSAL ANGLE BLOCK SET

Quick Change Tool PostFeatures:Both are precision engineered to assure repetitive accuracy.Advanced design provides built-in quick tool changing versatility with positive rigidity to meet the most exacting tolerances.Quickly and easily installed on an engine,bench, or turret lathe for a wide range of operations, from fine precision work for heavy duty cutting.Piston type posts are economical,while the wedge type posts are clearly ultra-precise. both accept the toolholders and interchange with aloes, durian,and DTM tooling.ItemDescription0250-0111Model:AXA,Wedge Style   A:2-1/2",B:3-7/8",C:2-1/4",D:9/16",E:1-3/8",H:4-11/16",R:5-3/4",Swing:6-12"0250-0222Model:BXA,Wedge Style   A:3",B:4-5/8",C:2-3/4",D:5/8",E:1-9/16",H:5-9/16"   ,R:7-5/16",Swing:10-15"0250-0333Model:CXA,Wedge Style   A:3-1/2",B:5-1/8",C:3",D:3/4",E:1-29/32",H:6-1/8",R:7-7/8",Swing:13-18"0250-0444Model:CA,Wedge Style   A:4",B:6-1/4",C:3-5/8",D:7/8",E:2-1/8",H:7",R:9",Swing:14-20"0250-0100Model:AXA,Piston Style   A:2-1/2",B:3-7/8",C:2-1/4",D:9/16",E:1-7/16",H:4-11/16",R:5-3/4",Swing:6-12"0250-0200Model:BXA,Piston Style   A:3",B:4-5/8"C:2-3/4"D:5/8",E:1-5/8"   ,H:5-9/16",R:7-5/16",Swing:10-15"0250-0300Model:CXA,Piston Style   A:3-3/8",B:5-1/8"C:3"D:3/4",E:1-7/8"x6-1/8"x7-7/8"x13-18"0250-0400Model:CA,Piston Style   A:4",B:6-1/4"C:3-5/8"D:7/8",E:2-1/8"x7"x9"x14-20"

Knurling, Turning And Facing Holder #10Features:For turning facing as well as knurling .Supplied with a set of high speed,precision-ground,lapped  medium diamond knurls. Dimensions: 3/4"X3/8"X1/4" ItemDescription0250-0110Model:AXA,A:7/8",B:2-1/2",C:1-9/16",E:1/2",Toolbit:3/16"-1/2"0250-0210Model:BXA,A:1",B:2-5/8",C:1-3/4",E:5/8",Toolbit:1/4"-5/8"0250-0310Model:CXA,A:1-3/16",B:3-1/8",C:2",E:3/4",Toolbit:1/2"-3/4"0250-0410Model:CA,A:1- 7/16",B:3-   3/4",C:2-1/2"E:1",Toolbit:1/2"-1"

Universal Parting Blade Holder #7Features:V-groove holds round shank boring bars and tools as well as square toolbits. Boring bar not included. ItemDescription0250-0107Model:AXA,A:15/16",B:1/2",C:7/16",D:1-1/2",Shank:7/16"0250-0207Model:BXA,A:1-1/8",B:5/8",C:1/2",D:1-3/4",Shank:1/2"0250-0307Model:CXA,A:1-7/16",B:3/4",C:5/8",D:2-1/8",Shank:3/4"0250-0407Model:CA,A:1-11/16",B:1",C:3/4",D:2-1/2",Shank:13/16"

Boring, Turning And Facing Holder #2Features:V-groove holds round shank boring bars and  tools as well as square toolbits.  ItemDescription0250-0102Model:AXA,A:15/16",B:1/2",C:7/16",D:1-1/2",Tool   Bit:3/16"-1/2",Shank:7/16"0250-0102TModel:AXA,A:15/16",B:5/8",C:7/16",D:1-1/2",Tool   Bit:3/16"-5/8",Shank:7/16"0250-0202Model:BXA,A:1-1/8",B:5/8",C:1/2",D:1-3/4",Tool   Bit:1/4"-5/8",Shank:1/2"0250-0202TModel:BXA,A:1-1/8",B:3/4",C:1/2",D:1-3/4",Tool   Bit:1/4"-3/4",Shank:1/2"0250-0302Model:CXA,A:1-7/16",B:3/4",C:5/8",D:2-1/8",Tool   Bit:1/2"-3/4",Shank:3/4"0250-0402Model:CA,A:1-11/16",B:1",C:3/4",D:2-1/2",Tool   Bit:1/2"-1",Shank:13/16"

Turning And Facing Holder #1Features:Takes various sizes of bits, turning and facing  tools can be locked together.Save time and labor when changing operations.ItemDescription0250-0101Model:AXA, A:15/16", B:1/2", C:7/16",   D:1-1/2"0250-0201Model:BXA, A:1-1/8", B:5/8", C:1/2", D:1-3/4"0250-0201TModel:BXA, A:1-1/8", B:3/4", C:1/2", D:1-3/4"0250-0301Model:CXA, A:1-7/16", B:3/4", C:5/8",   D:2-1/8"0250-0401Model:CA, A:1-11/16", B:1", C:3/4", D:2-1/2"0250-0501Model:-, A:3-3/16", B:1-1/4", C:1", D:3-1/8"

Quick Change Tool Post Sets(USA Style) Piston Type Tool Post Sets(6 Piece Sets)Features:● Each set consist of one piston type tool Post and    one of each of 5 tool holders:   Style 1: Turning & Facing   Style 2: Boring Turning & Facing   Sytle 4: Boring, Heavy duty   Style 7: Universal Parting Blades   Style 10: Knurling, Facing & Turning.ItemDescription0251-0100Model:AXA,Lathe Swing:6-12",Each   1pc:0250-0100,    0250-0101,0250-0102,0250-0104,0250-0107,0250-01100251-0200Model:BXA,Lathe Swing:10-15"Each   1pc:0250-0200,    0250-0201,0250-0202,0250-0204,0250-0207,0250-02100251-0300Model:CXA,Lathe Swing:13-18"Each   1pc:0250-0300   ,0250-0301,0250-0302,0250-0304,0250-0307,0250-03100251-0400Model:CA,Lathe Swing:14-20"Each   1pc:0250-0400,      0250-0401,0250-0402,0250-0404,0250-0407,0250-0410

Radius And Angle DresserMaximum diameter of wheel 12" Convex radii 0-1-5/8" Concave radii 0-4" Tangent travel, either side of center 2" Center line of tool 3.4" Overall length 16.61" Weight 30lbs. ItemDescriptionHE30-0005Radius And Angle Dreser