10 pcs BXA Wedge Type Quick Change Tool Post Set1pc AXA Wedge Type Tool Post for Lathe 10 - 15", with 7 pcs Tool Holders and 1pc Two Wheel Knurling Tool,1pc Heavy-duty Indexable Grooving & Cut-off Holder (Nickel plated) Features:Wedge type tool posts are precision engineered to assure repetitive accuracyWedge type tool posts have the Maximum rigidity to get the chatter-free cuttingNo time wasted with shimsAll working parts hardened and precision groundThe tool post comes with a "T" type plate, customers may need to machining to make it fit into their specific lathe T-slotSuitable for lathe center height 0.7 - 2.2" (top compound surface to lathe centerline), such as Emco: Elnomat13S; Delta 14"; Monarch: 13; Sheldon: 11 &13"; South Bend 13", 14" & 1307; Logan 14"; Harrison: 11, 12 &13"; Clausing: 1300 series; Nardini: MS1400 MS1600; Acer: 1340 and many other same size lathes. Interchangeable with Aloris, Phase II, Dorian, Yuasa etc. Each set consists of one Wedge type tool post, 7 tool holders, 1 knurling tool and 1 heavy-duty indexable grooving & cut-off holder:1pc of 0252-0222 Wedge Style Quick Change Tool Post2pcs of 0250-0201 Turning & Facing Tool Holders2pcs of 0250-0201T Extra XL Turning & Facing Tool Holders 1pc of 0250-0202 Boring, Turning & Facing Tool Holder1pc of 0250-0202T Extra XL Boring, Turning & Facing Tool Holder1pc of 0250-0204 Heavy Duty, Boring & Bar Tool Holder1pc of 0250-0207 Universal Parting Blades Tool HolderAnd these follows 2 items can be used separately with any square tool bit holders:1pc of 0250-1740 Two Wheel Knurling Tool, Holder: 4"x1/2"x1/2"; Knurls: 3/4"(Dia) x 1/4"(Face) x 1/4"(Hole)1pc of 2415-5030 Heavy-Duty Indexable grooving & cut-off holder with inserts 2403-2004 GTN-3 installed, Size: QA12R-30C, 3/4" x 3/4" x 5" OALItemDescription0251-0229Model:BXA,Lathe Swing:10-15", Each 1pc 0252-0222, 0250-0201, 0250-0201, 0250-0202, 0250-0201T, 0250-0202T, 0250-0204, 0250-0207, 0250-1740, 2415-5030
11pcs AXA Wedge Type Quick Change Tool Post Set1pc AXA Wedge Type Tool Post for Lathe 6 - 12",with 8 pcs Tool Holders and 1pc Two Wheel Knurling Tool,1pc Heavy-duty Indexable Grooving & Cut-off Holder (Nickel plated)Features:Wedge type tool posts are precision engineered to assure repetitive accuracy Wedge type tool posts have the Maximum rigidity to get the chatter-free cutting No time wasted with shims All working parts hardened and precision ground The tool post comes with a blank plate, customers may need to machining to make it fit into their specific lathe T-slot Suitable for lathe center height 0.6 - 1.75" (top compound surface to lathe centerline), such as: Atlas 10 & 12", Delta 10 & 11"; South Bend 9" & 10", Nardini TT1000 & TT1200 and many other same size lathes Each set consists of one Wedge type tool post, 8 tool holders, 1 knurling tool and 1 heavy-duty indexable grooving & cut-off holder:1pc of 0252-0111 Wedge Style Quick Change Tool Post 2pcs of 0250-0101 Turning & Facing Tool Holders 1pc of 0250-0101T Extra XL Turning & Facing Tool Holder 2pcs of 0250-0102 Boring, Turning & Facing Tool Holders 1pc of 0250-0102T Extra XL Boring, Turning & Facing Tool Holder 1pc of 0250-0104 Heavy Duty, Boring & Bar Tool Holder 1pc of 0250-0107 Universal Parting Blades Tool HolderAnd these follows 2 items can be used separately with any square tool bit holders:1pc of 0250-1740 Two Wheel Knurling Tool, Holder: 4"x1/2"x1/2"; Knurls: 3/4"(Dia) x 1/4"(Face) x 1/4"(Hole)1pc of 2415-5024 Heavy-Duty Indexable grooving & cut-off holder with inserts 2403-2003 GTN-2 installed,Size: QA08R-20B, 1/2" x 1/2" x 4-1/2" OALItemDescription0251-0119Model:AXA,Lathe Swing:6-12",Each 1pc 0252-0111, 0250-0101, 0250-0101, 0250-0101T, 0250-0102, 0250-0102, 0250-0102T, 0250-0104, 0250-0107, 0250-1740, 2415-5024
5 pcs AXA Wedge Type Quick Change Tool Post Set1pc AXA Wedge Type Tool Post for Lathe 6 - 12", with 3 pcs Tool Holders and 1pc 1/2'' M35 Square Lathe BitFeatures:All parts are hardened, ground and completely sealed for maintenance-free operation.Quick change QC tool post sets advanced design provides built-in quick tool changing versatility with positive rigidity to meet the most exacting working tolerances.Quickly and easily installed on an engine bench or turret lathe quick change QC tool post sets perform a wide range of operations from fine precise work to heavy-duty cutting.Maximum rigidity for chatter-free performance.Quick change QC tool post sets are interchangeable with all industry-leading brands by series. Each set consists of one Wedge type tool post, 3 tool holders and 1 Lathe Bit:1pc of 0250-0111 Wedge Style Quick Change Tool Post1pc of 0250-0101 Turning & Facing Tool Holder1pc of 0250-0101T Extra XL Turning & Facing Tool Holder 1pc of 0250-0102 Boring Turing & Facing Tool Holder1pc of 5095-0032 M35 Square Lathe Bit, 1/2" x 1/2" x 4" OALItemDescription0251-0155Model:AXA,Lathe Swing:6"-12",Each 1pc 0250-0111, 0250-0101, 0250-0101T, 0250-0102, 5095-0032
L-00 Type Adaptor For 3-Jaw Lathe ChuckFeatures:For 3 Jaw plain back chucksDirect mounting on "L" type spindle noseItemDescription2700-0500Chuck Dia:6",Spindle Taper:L-002700-0501Chuck Dia:8",Spindle Taper:L-002700-0502Chuck Dia:10",Spindle Taper:L-00
Solid Angle Plates SetFeatures:Hardened & ground steel. Precision ground angles forsetup in tooling,production and inspection.Four holes 11/32" for easy mounting.Accuracy: ±10 minutes.ItemDescriptionEG10-9010Dimension: (30º, 60º, 90º) and (45º, 45º, 90º)
Fully Machined Lthe Chuck Back Plate D1 Type Adaptor For Most 4 Jaw Independent ChuckFeatures:Need machining the back plate shoulders based on different 4 jaw independent chucksThe back plate outside diameter is smaller than the lathe chuck diameter due to the mounting holes are towards the center of the lathe chuck, then the recess diameter D2 of the lathe chuck still provide a tight fit.ItemDescription2600-0162Spindle Taper:D1-3, Chuck Diameter:6" D=6.29"2600-0163Spindle Taper:D1-4, Chuck Diameter:6" D=6.29"2600-0164Spindle Taper:D1-5, Chuck Diameter:6" D=6.29"2600-0165Spindle Taper:D1-3, Chuck Diameter:8" D=6.29"2600-0166Spindle Taper:D1-4, Chuck Diameter:8" D=6.29"2600-0167Spindle Taper:D1-6, Chuck Diameter:8" D=6.29"2600-0168Spindle Taper:D1-6, Chuck Diameter:10" D=7.87"2600-0169Spindle Taper:D1-8, Chuck Diameter:10" D=9.05"
Two-Piece Reversible Jaws 3-Jaw Self-Centring Chuck Direct Mount" D1" Series (Direct Mounting) Chuck. Features:Hardened and ground two-piece reversible jaws Semi-steel body Complete with chuck key Standard accuracy Standard scroll ItemDescription0559-0101Diameter:6"/160mm0559-0102Diameter:8"/200mm0559-0104Diameter:8"/200mm0559-0106Diameter:10"/250mm0559-0108Diameter:12"/320mm
6"X6" Magnetic Sine PlateCenter Distance of Rolls 5", within 0.0002"Features:Using high quality materials, strong suction, small remanent magnetization,the magnetic distributionProcess through special processing, make the adjustment of the precisionis higher.Flat type for wide range of uses.Ideal for high accuracy grinding operationsSealed against dirt and liquids.A removable handle and two precision ground rails are included for themagnetic chuckSteel pole spacing: 1/16", brass pole spacing: 1/32"Center distance of rolls 5", within 0.0002"High holding power: max 140lbs/sq.in.ItemDescription2520-10006"x6"
Quick Change Tool PostFeatures:Both are precision engineered to assure repetitive accuracy.Advanced design provides built-in quick tool changing versatility with positive rigidity to meet the most exacting tolerances.Quickly and easily installed on an engine, bench,or turret lathe for a wide range of operations, from fine precision work for heavy duty cutting.Wedge type posts are clearly ultra-precise.Accept the toolholders and interchange with aloes, durian, and DTM tooling.ItemDescription0252-0111Model:AXA, A:2-1/2", B:3-7/8", C:2-1/4", D:9/16", E:1-3/8", H:4-11/16", R:5-3/4", Swing:6-12"0252-0222Model:BXA, A:3", B:4-5/8", C:2-3/4", D:5/8", E:1-9/16", H:5-9/16", R:7-5/16", Swing:10-15"0252-0333Model:CXA, A:3-1/2", B:5-1/8", C:3", D: 3/4", E:1-29/32", H:6-1/8", R:7-7/8", Swing:13-18"
Profile Wheel DresserFeatures:Convex radii: 0 to 1.500" Concave Radii: 0.03" to 1.500" Dressing Capacity Up to 8" wheel Dia Height to center of diamond: 6-1/2" Overall Height: 7" Base dimensions: 4-3/4 x 3-1/2 x 1-1/4" Diamond is not included ItemDescriptionEG11-0400Profile Wheel Dresser
Speed Handle For Machine ViseFeatures:3/4" Hex. hub Move the vise jaw much faster. ItemDescription1100-8116SPEED HANDLE FOR MACHINE VISE
Super Angle Lock Precision Swivel Base Milling Machine ViseFeatures:● With swivel base● Removable hinged handle for fast locking● Provides better clamping pressureItemDescriptionFA20-4204Length: 13.582", Width: 8.858", Height: 4.724"FA20-4206Length: 17.322", Width: 10.944", Height: 6.023"
BT40 Tool Holder Tightening Fixture For Universal CNC Equipment, Double Head Anodized HardenedFeatures:Applicable model is BT40Realize Double-end Mounting, facilitate mount and dismount.Modern design, protect the conical surface of the tool holder.Sliding block positioning design, correct orientation and non-skid.Adopt new material, detailed and comprehensive protection.Match for BT40 tool holer type: BT40 L: 255mm W: 140mm H: 140mmWhen installing the CNC tools on machine tools, some parts such as tools and pull studs need to installed on tool holders. Because of the specific form of the CNC tools, the traditional tool lock seat can’t satisfy the tighten or unscrew requirement during production, assembling and using. There are an upward direction lock snap ring and a downward direction lock snap ring on the dicephalous tool lock base. They can satisfy the installation of CNC pull studs, ER nuts, and Tools, etc. from both directions.ItemDescriptionBT40-8540L: 255mm W: 140mm H: 140mm