Fully Machined Lthe Chuck Back Plate D1 Type Adaptor For Most 4 Jaw Independent Chuck
Features:
Need machining the back plate shoulders based on different 4 jaw independent chucks
The back plate outside diameter is smaller than the lathe chuck diameter due to the mounting holes are towards the center of the lathe chuck, then the recess diameter D2 of the lathe chuck still provide a tight fit.
Item | Description |
2600-0162 | Spindle Taper:D1-3, Chuck Diameter:6" D=6.29" |
2600-0163 | Spindle Taper:D1-4, Chuck Diameter:6" D=6.29" |
2600-0164 | Spindle Taper:D1-5, Chuck Diameter:6" D=6.29" |
2600-0165 | Spindle Taper:D1-3, Chuck Diameter:8" D=6.29" |
2600-0166 | Spindle Taper:D1-4, Chuck Diameter:8" D=6.29" |
2600-0167 | Spindle Taper:D1-6, Chuck Diameter:8" D=6.29" |
2600-0168 | Spindle Taper:D1-6, Chuck Diameter:10" D=7.87" |
2600-0169 | Spindle Taper:D1-8, Chuck Diameter:10" D=9.05" |